#include "PciSegmentLib.h"

Functions
EFI_STATUS EFIAPI	PciSegmentLibConstructor (IN EFI_HANDLE ImageHandle, IN EFI_SYSTEM_TABLE *SystemTable)

EFI_STATUS EFIAPI	PciSegmentLibDestructor (IN EFI_HANDLE ImageHandle, IN EFI_SYSTEM_TABLE *SystemTable)

EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *	PciSegmentLibSearchForRootBridge (IN UINT64 Address)

UINT32	DxePciSegmentLibPciRootBridgeIoReadWorker (IN UINT64 Address, IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width)

UINT32	DxePciSegmentLibPciRootBridgeIoWriteWorker (IN UINT64 Address, IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, IN UINT32 Data)

RETURN_STATUS EFIAPI	PciSegmentRegisterForRuntimeAccess (IN UINTN Address)

UINT8 EFIAPI	PciSegmentRead8 (IN UINT64 Address)

UINT8 EFIAPI	PciSegmentWrite8 (IN UINT64 Address, IN UINT8 Value)

UINT8 EFIAPI	PciSegmentOr8 (IN UINT64 Address, IN UINT8 OrData)

UINT8 EFIAPI	PciSegmentAnd8 (IN UINT64 Address, IN UINT8 AndData)

UINT8 EFIAPI	PciSegmentAndThenOr8 (IN UINT64 Address, IN UINT8 AndData, IN UINT8 OrData)

UINT8 EFIAPI	PciSegmentBitFieldRead8 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit)

UINT8 EFIAPI	PciSegmentBitFieldWrite8 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 Value)

UINT8 EFIAPI	PciSegmentBitFieldOr8 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 OrData)

UINT8 EFIAPI	PciSegmentBitFieldAnd8 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData)

UINT8 EFIAPI	PciSegmentBitFieldAndThenOr8 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData, IN UINT8 OrData)

UINT16 EFIAPI	PciSegmentRead16 (IN UINT64 Address)

UINT16 EFIAPI	PciSegmentWrite16 (IN UINT64 Address, IN UINT16 Value)

UINT16 EFIAPI	PciSegmentOr16 (IN UINT64 Address, IN UINT16 OrData)

UINT16 EFIAPI	PciSegmentAnd16 (IN UINT64 Address, IN UINT16 AndData)

UINT16 EFIAPI	PciSegmentAndThenOr16 (IN UINT64 Address, IN UINT16 AndData, IN UINT16 OrData)

UINT16 EFIAPI	PciSegmentBitFieldRead16 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit)

UINT16 EFIAPI	PciSegmentBitFieldWrite16 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 Value)

UINT16 EFIAPI	PciSegmentBitFieldOr16 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 OrData)

UINT16 EFIAPI	PciSegmentBitFieldAnd16 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData)

UINT16 EFIAPI	PciSegmentBitFieldAndThenOr16 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData, IN UINT16 OrData)

UINT32 EFIAPI	PciSegmentRead32 (IN UINT64 Address)

UINT32 EFIAPI	PciSegmentWrite32 (IN UINT64 Address, IN UINT32 Value)

UINT32 EFIAPI	PciSegmentOr32 (IN UINT64 Address, IN UINT32 OrData)

UINT32 EFIAPI	PciSegmentAnd32 (IN UINT64 Address, IN UINT32 AndData)

UINT32 EFIAPI	PciSegmentAndThenOr32 (IN UINT64 Address, IN UINT32 AndData, IN UINT32 OrData)

UINT32 EFIAPI	PciSegmentBitFieldRead32 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit)

UINT32 EFIAPI	PciSegmentBitFieldWrite32 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 Value)

UINT32 EFIAPI	PciSegmentBitFieldOr32 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 OrData)

UINT32 EFIAPI	PciSegmentBitFieldAnd32 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData)

UINT32 EFIAPI	PciSegmentBitFieldAndThenOr32 (IN UINT64 Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData, IN UINT32 OrData)

UINTN EFIAPI	PciSegmentReadBuffer (IN UINT64 StartAddress, IN UINTN Size, OUT VOID *Buffer)

UINTN EFIAPI	PciSegmentWriteBuffer (IN UINT64 StartAddress, IN UINTN Size, IN VOID *Buffer)

Variables
PCI_ROOT_BRIDGE_DATA *	mPciRootBridgeData = NULL

UINTN	mNumberOfPciRootBridges = 0

Detailed Description

PCI Segment Library implementation using PCI Root Bridge I/O Protocol.

Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent

Definition in file PciSegmentLib.c.

Function Documentation

◆ DxePciSegmentLibPciRootBridgeIoReadWorker()

UINT32 DxePciSegmentLibPciRootBridgeIoReadWorker	(	IN UINT64	Address,
		IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH	Width
	)

Internal worker function to read a PCI configuration register.

This function wraps EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() service. It reads and returns the PCI configuration register specified by Address, the width of data is specified by Width.

Parameters

Address	The address that encodes the PCI Bus, Device, Function and Register.
Width	Width of data to read

Returns: The value read from the PCI configuration register.

Definition at line 178 of file PciSegmentLib.c.

◆ DxePciSegmentLibPciRootBridgeIoWriteWorker()

UINT32 DxePciSegmentLibPciRootBridgeIoWriteWorker	(	IN UINT64	Address,
		IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH	Width,
		IN UINT32	Data
	)

Internal worker function to writes a PCI configuration register.

This function wraps EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Write() service. It writes the PCI configuration register specified by Address with the value specified by Data. The width of data is specifed by Width. Data is returned.

Parameters

Address	The address that encodes the PCI Bus, Device, Function and Register.
Width	Width of data to write
Data	The value to write.

Returns: The value written to the PCI configuration register.

Definition at line 221 of file PciSegmentLib.c.

◆ PciSegmentAnd16()

UINT16 EFIAPI PciSegmentAnd16	(	IN UINT64	Address,
		IN UINT16	AndData
	)

Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
AndData	The value to AND with the PCI configuration register.

Returns: The value written to the PCI configuration register.

Definition at line 712 of file PciSegmentLib.c.

◆ PciSegmentAnd32()

UINT32 EFIAPI PciSegmentAnd32	(	IN UINT64	Address,
		IN UINT32	AndData
	)

Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
AndData	The value to AND with the PCI configuration register.

Returns: The value written to the PCI configuration register.

Definition at line 1058 of file PciSegmentLib.c.

◆ PciSegmentAnd8()

UINT8 EFIAPI PciSegmentAnd8	(	IN UINT64	Address,
		IN UINT8	AndData
	)

Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If any reserved bits in Address are set, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
AndData	The value to AND with the PCI configuration register.

Returns: The value written to the PCI configuration register.

Definition at line 370 of file PciSegmentLib.c.

◆ PciSegmentAndThenOr16()

UINT16 EFIAPI PciSegmentAndThenOr16	(	IN UINT64	Address,
		IN UINT16	AndData,
		IN UINT16	OrData
	)

Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value, followed a bitwise OR with another 16-bit value.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written to the PCI configuration register.

Definition at line 743 of file PciSegmentLib.c.

◆ PciSegmentAndThenOr32()

UINT32 EFIAPI PciSegmentAndThenOr32	(	IN UINT64	Address,
		IN UINT32	AndData,
		IN UINT32	OrData
	)

Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value, followed a bitwise OR with another 32-bit value.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written to the PCI configuration register.

Definition at line 1089 of file PciSegmentLib.c.

◆ PciSegmentAndThenOr8()

UINT8 EFIAPI PciSegmentAndThenOr8	(	IN UINT64	Address,
		IN UINT8	AndData,
		IN UINT8	OrData
	)

Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value, followed a bitwise OR with another 8-bit value.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written to the PCI configuration register.

Definition at line 400 of file PciSegmentLib.c.

◆ PciSegmentBitFieldAnd16()

UINT16 EFIAPI PciSegmentBitFieldAnd16	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	AndData
	)

Reads a bit field in a 16-bit PCI configuration register, performs a bitwise AND, writes the result back to the bit field in the 16-bit register.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

Definition at line 898 of file PciSegmentLib.c.

◆ PciSegmentBitFieldAnd32()

UINT32 EFIAPI PciSegmentBitFieldAnd32	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	AndData
	)

Reads a bit field in a 32-bit PCI configuration register, performs a bitwise AND, and writes the result back to the bit field in the 32-bit register.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped. If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

Definition at line 1242 of file PciSegmentLib.c.

◆ PciSegmentBitFieldAnd8()

UINT8 EFIAPI PciSegmentBitFieldAnd8	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	AndData
	)

Reads a bit field in an 8-bit PCI configuration register, performs a bitwise AND, and writes the result back to the bit field in the 8-bit register.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped.

If any reserved bits in Address are set, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

Definition at line 551 of file PciSegmentLib.c.

◆ PciSegmentBitFieldAndThenOr16()

UINT16 EFIAPI PciSegmentBitFieldAndThenOr16	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	AndData,
		IN UINT16	OrData
	)

Reads a bit field in a 16-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 16-bit port.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped.

If any reserved bits in Address are set, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

Definition at line 944 of file PciSegmentLib.c.

◆ PciSegmentBitFieldAndThenOr32()

UINT32 EFIAPI PciSegmentBitFieldAndThenOr32	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	AndData,
		IN UINT32	OrData
	)

Reads a bit field in a 32-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 32-bit port.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped.

If any reserved bits in Address are set, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

Definition at line 1288 of file PciSegmentLib.c.

◆ PciSegmentBitFieldAndThenOr8()

UINT8 EFIAPI PciSegmentBitFieldAndThenOr8	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	AndData,
		IN UINT8	OrData
	)

Reads a bit field in an 8-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 8-bit port.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped.

If any reserved bits in Address are set, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

Definition at line 596 of file PciSegmentLib.c.

◆ PciSegmentBitFieldOr16()

UINT16 EFIAPI PciSegmentBitFieldOr16	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	OrData
	)

Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, writes the result back to the bit field in the 16-bit port.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

Definition at line 855 of file PciSegmentLib.c.

◆ PciSegmentBitFieldOr32()

UINT32 EFIAPI PciSegmentBitFieldOr32	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	OrData
	)

Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and writes the result back to the bit field in the 32-bit port.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped.

If any reserved bits in Address are set, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

Definition at line 1200 of file PciSegmentLib.c.

◆ PciSegmentBitFieldOr8()

UINT8 EFIAPI PciSegmentBitFieldOr8	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	OrData
	)

Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and writes the result back to the bit field in the 8-bit port.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped.

If any reserved bits in Address are set, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

Definition at line 509 of file PciSegmentLib.c.

◆ PciSegmentBitFieldRead16()

UINT16 EFIAPI PciSegmentBitFieldRead16	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a PCI configuration register.

Reads the bit field in a 16-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	PCI configuration register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.

Returns: The value of the bit field read from the PCI configuration register.

Definition at line 776 of file PciSegmentLib.c.

◆ PciSegmentBitFieldRead32()

UINT32 EFIAPI PciSegmentBitFieldRead32	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a PCI configuration register.

Reads the bit field in a 32-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	PCI configuration register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.

Returns: The value of the bit field read from the PCI configuration register.

Definition at line 1122 of file PciSegmentLib.c.

◆ PciSegmentBitFieldRead8()

UINT8 EFIAPI PciSegmentBitFieldRead8	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a PCI configuration register.

Reads the bit field in an 8-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If any reserved bits in Address are set, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	PCI configuration register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.

Returns: The value of the bit field read from the PCI configuration register.

Definition at line 432 of file PciSegmentLib.c.

◆ PciSegmentBitFieldWrite16()

UINT16 EFIAPI PciSegmentBitFieldWrite16	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	Value
	)

Writes a bit field to a PCI configuration register.

Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 16-bit register is returned.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
Value	New value of the bit field.

Returns: The value written back to the PCI configuration register.

Definition at line 812 of file PciSegmentLib.c.

◆ PciSegmentBitFieldWrite32()

UINT32 EFIAPI PciSegmentBitFieldWrite32	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	Value
	)

Writes a bit field to a PCI configuration register.

Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 32-bit register is returned.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
Value	New value of the bit field.

Returns: The value written back to the PCI configuration register.

Definition at line 1158 of file PciSegmentLib.c.

◆ PciSegmentBitFieldWrite8()

UINT8 EFIAPI PciSegmentBitFieldWrite8	(	IN UINT64	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	Value
	)

Writes a bit field to a PCI configuration register.

Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 8-bit register is returned.

If any reserved bits in Address are set, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
Value	New value of the bit field.

Returns: The value written back to the PCI configuration register.

Definition at line 467 of file PciSegmentLib.c.

◆ PciSegmentLibConstructor()

EFI_STATUS EFIAPI PciSegmentLibConstructor	(	IN EFI_HANDLE	ImageHandle,
		IN EFI_SYSTEM_TABLE *	SystemTable
	)

The constructor function caches data of PCI Root Bridge I/O Protocol instances.

The constructor function locates PCI Root Bridge I/O protocol instances, and caches the protocol instances, together with their segment numbers and bus ranges. It will ASSERT() if that related operation fails and it will always return EFI_SUCCESS.

Parameters

ImageHandle	The firmware allocated handle for the EFI image.
SystemTable	A pointer to the EFI System Table.

Return values

EFI_SUCCESS The constructor always returns EFI_SUCCESS.

Definition at line 32 of file PciSegmentLib.c.

◆ PciSegmentLibDestructor()

EFI_STATUS EFIAPI PciSegmentLibDestructor	(	IN EFI_HANDLE	ImageHandle,
		IN EFI_SYSTEM_TABLE *	SystemTable
	)

The destructor function frees memory allocated by constructor.

The destructor function frees memory for data of protocol instances allocated by constructor. It will ASSERT() if that related operation fails and it will always return EFI_SUCCESS.

Parameters

ImageHandle	The firmware allocated handle for the EFI image.
SystemTable	A pointer to the EFI System Table.

Return values

EFI_SUCCESS The constructor always returns EFI_SUCCESS.

Definition at line 113 of file PciSegmentLib.c.

◆ PciSegmentLibSearchForRootBridge()

EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL * PciSegmentLibSearchForRootBridge ( IN UINT64 Address )

According to address, search for the corresponding PCI Root Bridge I/O Protocol instance.

This internal function extracts segment number and bus number data from address, and retrieves the corresponding PCI Root Bridge I/O Protocol instance.

Parameters

Address The address that encodes the Segment, PCI Bus, Device, Function and Register.

Returns: The address for PCI Root Bridge I/O Protocol.

Definition at line 136 of file PciSegmentLib.c.

◆ PciSegmentOr16()

UINT16 EFIAPI PciSegmentOr16	(	IN UINT64	Address,
		IN UINT16	OrData
	)

Performs a bitwise OR of a 16-bit PCI configuration register with a 16-bit value.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function and Register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

Definition at line 684 of file PciSegmentLib.c.

◆ PciSegmentOr32()

UINT32 EFIAPI PciSegmentOr32	(	IN UINT64	Address,
		IN UINT32	OrData
	)

Performs a bitwise OR of a 32-bit PCI configuration register with a 32-bit value.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written to the PCI configuration register.

Definition at line 1030 of file PciSegmentLib.c.

◆ PciSegmentOr8()

UINT8 EFIAPI PciSegmentOr8	(	IN UINT64	Address,
		IN UINT8	OrData
	)

Performs a bitwise OR of an 8-bit PCI configuration register with an 8-bit value.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written to the PCI configuration register.

Definition at line 344 of file PciSegmentLib.c.

◆ PciSegmentRead16()

UINT16 EFIAPI PciSegmentRead16 ( IN UINT64 Address )

Reads a 16-bit PCI configuration register.

Reads and returns the 16-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.

Returns: The 16-bit PCI configuration register specified by Address.

Definition at line 626 of file PciSegmentLib.c.

◆ PciSegmentRead32()

UINT32 EFIAPI PciSegmentRead32 ( IN UINT64 Address )

Reads a 32-bit PCI configuration register.

Reads and returns the 32-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.

Returns: The 32-bit PCI configuration register specified by Address.

Definition at line 974 of file PciSegmentLib.c.

◆ PciSegmentRead8()

UINT8 EFIAPI PciSegmentRead8 ( IN UINT64 Address )

Reads an 8-bit PCI configuration register.

Reads and returns the 8-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT().

Parameters

Address Address that encodes the PCI Segment, Bus, Device, Function, and Register.

Returns: The 8-bit PCI configuration register specified by Address.

Definition at line 290 of file PciSegmentLib.c.

◆ PciSegmentReadBuffer()

UINTN EFIAPI PciSegmentReadBuffer	(	IN UINT64	StartAddress,
		IN UINTN	Size,
		OUT VOID *	Buffer
	)

Reads a range of PCI configuration registers into a caller supplied buffer.

Reads the range of PCI configuration registers specified by StartAddress and Size into the buffer specified by Buffer. This function only allows the PCI configuration registers from a single PCI function to be read. Size is returned. When possible 32-bit PCI configuration read cycles are used to read from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit and 16-bit PCI configuration read cycles may be used at the beginning and the end of the range.

If any reserved bits in StartAddress are set, then ASSERT(). If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). If Size > 0 and Buffer is NULL, then ASSERT().

Parameters

StartAddress	Starting address that encodes the PCI Segment, Bus, Device, Function and Register.
Size	Size in bytes of the transfer.
Buffer	Pointer to a buffer receiving the data read.

Returns: Size

Definition at line 1327 of file PciSegmentLib.c.

◆ PciSegmentRegisterForRuntimeAccess()

RETURN_STATUS EFIAPI PciSegmentRegisterForRuntimeAccess ( IN UINTN Address )

Register a PCI device so PCI configuration registers may be accessed after SetVirtualAddressMap().

If any reserved bits in Address are set, then ASSERT().

Parameters

Address Address that encodes the PCI Bus, Device, Function and Register.

Return values

RETURN_SUCCESS	The PCI device was registered for runtime access.
RETURN_UNSUPPORTED	An attempt was made to call this function after ExitBootServices().
RETURN_UNSUPPORTED	The resources required to access the PCI device at runtime could not be mapped.
RETURN_OUT_OF_RESOURCES	There are not enough resources available to complete the registration.

Definition at line 267 of file PciSegmentLib.c.

◆ PciSegmentWrite16()

UINT16 EFIAPI PciSegmentWrite16	(	IN UINT64	Address,
		IN UINT16	Value
	)

Writes a 16-bit PCI configuration register.

Writes the 16-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
Value	The value to write.

Returns: The parameter of Value.

Definition at line 652 of file PciSegmentLib.c.

◆ PciSegmentWrite32()

UINT32 EFIAPI PciSegmentWrite32	(	IN UINT64	Address,
		IN UINT32	Value
	)

Writes a 32-bit PCI configuration register.

Writes the 32-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
Value	The value to write.

Returns: The parameter of Value.

Definition at line 1000 of file PciSegmentLib.c.

◆ PciSegmentWrite8()

UINT8 EFIAPI PciSegmentWrite8	(	IN UINT64	Address,
		IN UINT8	Value
	)

Writes an 8-bit PCI configuration register.

Writes the 8-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized.

If any reserved bits in Address are set, then ASSERT().

Parameters

Address	Address that encodes the PCI Segment, Bus, Device, Function, and Register.
Value	The value to write.

Returns: The value written to the PCI configuration register.

Definition at line 315 of file PciSegmentLib.c.

◆ PciSegmentWriteBuffer()

UINTN EFIAPI PciSegmentWriteBuffer	(	IN UINT64	StartAddress,
		IN UINTN	Size,
		IN VOID *	Buffer
	)

Copies the data in a caller supplied buffer to a specified range of PCI configuration space.

Writes the range of PCI configuration registers specified by StartAddress and Size from the buffer specified by Buffer. This function only allows the PCI configuration registers from a single PCI function to be written. Size is returned. When possible 32-bit PCI configuration write cycles are used to write from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit and 16-bit PCI configuration write cycles may be used at the beginning and the end of the range.

If any reserved bits in StartAddress are set, then ASSERT(). If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). If Size > 0 and Buffer is NULL, then ASSERT().

Parameters

StartAddress	Starting address that encodes the PCI Segment, Bus, Device, Function and Register.
Size	Size in bytes of the transfer.
Buffer	Pointer to a buffer containing the data to write.

Returns: The parameter of Size.

Definition at line 1425 of file PciSegmentLib.c.

Variable Documentation

◆ mNumberOfPciRootBridges

UINTN mNumberOfPciRootBridges = 0

Definition at line 15 of file PciSegmentLib.c.

◆ mPciRootBridgeData

PCI_ROOT_BRIDGE_DATA* mPciRootBridgeData = NULL

Definition at line 14 of file PciSegmentLib.c.

Functions

Variables

Detailed Description

Function Documentation

◆ DxePciSegmentLibPciRootBridgeIoReadWorker()

◆ DxePciSegmentLibPciRootBridgeIoWriteWorker()

◆ PciSegmentAnd16()

◆ PciSegmentAnd32()

◆ PciSegmentAnd8()

◆ PciSegmentAndThenOr16()

◆ PciSegmentAndThenOr32()

◆ PciSegmentAndThenOr8()

◆ PciSegmentBitFieldAnd16()

◆ PciSegmentBitFieldAnd32()

◆ PciSegmentBitFieldAnd8()

◆ PciSegmentBitFieldAndThenOr16()

◆ PciSegmentBitFieldAndThenOr32()

◆ PciSegmentBitFieldAndThenOr8()

◆ PciSegmentBitFieldOr16()

◆ PciSegmentBitFieldOr32()

◆ PciSegmentBitFieldOr8()

◆ PciSegmentBitFieldRead16()

◆ PciSegmentBitFieldRead32()

◆ PciSegmentBitFieldRead8()

◆ PciSegmentBitFieldWrite16()

◆ PciSegmentBitFieldWrite32()

◆ PciSegmentBitFieldWrite8()

◆ PciSegmentLibConstructor()

◆ PciSegmentLibDestructor()

◆ PciSegmentLibSearchForRootBridge()

◆ PciSegmentOr16()

◆ PciSegmentOr32()

◆ PciSegmentOr8()

◆ PciSegmentRead16()

◆ PciSegmentRead32()

◆ PciSegmentRead8()

◆ PciSegmentReadBuffer()

◆ PciSegmentRegisterForRuntimeAccess()

◆ PciSegmentWrite16()

◆ PciSegmentWrite32()

◆ PciSegmentWrite8()

◆ PciSegmentWriteBuffer()

Variable Documentation

◆ mNumberOfPciRootBridges

◆ mPciRootBridgeData