Detailed Description

Data Structure Description:: The data values in SERIAL_IO_MODE are read-only and are updated by the code that produces the SERIAL_IO_PROTOCOL member functions.

Parameters

ControlMask	A mask for the Control bits that the device supports. The device must always support the Input Buffer Empty control bit.
TimeOut	If applicable, the number of microseconds to wait before timing out a Read or Write operation.
BaudRate	If applicable, the current baud rate setting of the device; otherwise, baud rate has the value of zero to indicate that device runs at the device's designed speed.
ReceiveFifoDepth	The number of characters the device will buffer on input
DataBits	The number of characters the device will buffer on input
Parity	If applicable, this is the EFI_PARITY_TYPE that is computed or checked as each character is transmitted or reveived. If the device does not support parity the value is the default parity value.
StopBits	If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character. If the device does not support stop bits the value is the default stop bit values.

Definition at line 256 of file SerialIo.h.

Field Documentation

UINT64 EFI_SERIAL_IO_MODE::BaudRate

Definition at line 263 of file SerialIo.h.

UINT32 EFI_SERIAL_IO_MODE::ControlMask

Definition at line 257 of file SerialIo.h.

UINT32 EFI_SERIAL_IO_MODE::DataBits

Definition at line 265 of file SerialIo.h.

UINT32 EFI_SERIAL_IO_MODE::Parity

Definition at line 266 of file SerialIo.h.

UINT32 EFI_SERIAL_IO_MODE::ReceiveFifoDepth

Definition at line 264 of file SerialIo.h.

UINT32 EFI_SERIAL_IO_MODE::StopBits

Definition at line 267 of file SerialIo.h.

UINT32 EFI_SERIAL_IO_MODE::Timeout

Definition at line 262 of file SerialIo.h.

The documentation for this struct was generated from the following file: