Macros
#define	EDKII_PEI_BLOCK_DEVICE_TYPE_ATA_HARD_DISK 8

Functions
EFI_STATUS EFIAPI	AhciBlockIoGetDeviceNo (IN EFI_PEI_SERVICES *PeiServices, IN EFI_PEI_RECOVERY_BLOCK_IO_PPI This, OUT UINTN *NumberBlockDevices)

EFI_STATUS EFIAPI	AhciBlockIoGetMediaInfo (IN EFI_PEI_SERVICES *PeiServices, IN EFI_PEI_RECOVERY_BLOCK_IO_PPI This, IN UINTN DeviceIndex, OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo)

EFI_STATUS EFIAPI	AhciBlockIoReadBlocks (IN EFI_PEI_SERVICES *PeiServices, IN EFI_PEI_RECOVERY_BLOCK_IO_PPI This, IN UINTN DeviceIndex, IN EFI_PEI_LBA StartLBA, IN UINTN BufferSize, OUT VOID *Buffer)

EFI_STATUS EFIAPI	AhciBlockIoGetDeviceNo2 (IN EFI_PEI_SERVICES *PeiServices, IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI This, OUT UINTN *NumberBlockDevices)

EFI_STATUS EFIAPI	AhciBlockIoGetMediaInfo2 (IN EFI_PEI_SERVICES *PeiServices, IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI This, IN UINTN DeviceIndex, OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo)

EFI_STATUS EFIAPI	AhciBlockIoReadBlocks2 (IN EFI_PEI_SERVICES *PeiServices, IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI This, IN UINTN DeviceIndex, IN EFI_PEI_LBA StartLBA, IN UINTN BufferSize, OUT VOID *Buffer)

Detailed Description

The AhciPei driver is used to manage ATA hard disk device working under AHCI mode at PEI phase.

SPDX-License-Identifier: BSD-2-Clause-Patent

Definition in file AhciPeiBlockIo.h.

Macro Definition Documentation

◆ EDKII_PEI_BLOCK_DEVICE_TYPE_ATA_HARD_DISK

#define EDKII_PEI_BLOCK_DEVICE_TYPE_ATA_HARD_DISK 8

Definition at line 17 of file AhciPeiBlockIo.h.

Function Documentation

◆ AhciBlockIoGetDeviceNo()

EFI_STATUS EFIAPI AhciBlockIoGetDeviceNo	(	IN EFI_PEI_SERVICES **	PeiServices,
		IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *	This,
		OUT UINTN *	NumberBlockDevices
	)

Gets the count of block I/O devices that one specific block driver detects.

This function is used for getting the count of block I/O devices that one specific block driver detects. If no device is detected, then the function will return zero.

Parameters

[in]	PeiServices	General-purpose services that are available to every PEIM.
[in]	This	Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
[out]	NumberBlockDevices	The number of block I/O devices discovered.

Return values

EFI_SUCCESS The operation performed successfully.

Definition at line 202 of file AhciPeiBlockIo.c.

◆ AhciBlockIoGetDeviceNo2()

EFI_STATUS EFIAPI AhciBlockIoGetDeviceNo2	(	IN EFI_PEI_SERVICES **	PeiServices,
		IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *	This,
		OUT UINTN *	NumberBlockDevices
	)

Gets the count of block I/O devices that one specific block driver detects.

This function is used for getting the count of block I/O devices that one specific block driver detects. If no device is detected, then the function will return zero.

Parameters

[in]	PeiServices	General-purpose services that are available to every PEIM.
[in]	This	Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
[out]	NumberBlockDevices	The number of block I/O devices discovered.

Return values

EFI_SUCCESS The operation performed successfully.

Definition at line 370 of file AhciPeiBlockIo.c.

◆ AhciBlockIoGetMediaInfo()

EFI_STATUS EFIAPI AhciBlockIoGetMediaInfo	(	IN EFI_PEI_SERVICES **	PeiServices,
		IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *	This,
		IN UINTN	DeviceIndex,
		OUT EFI_PEI_BLOCK_IO_MEDIA *	MediaInfo
	)

Gets a block device's media information.

This function will provide the caller with the specified block device's media information. If the media changes, calling this function will update the media information accordingly.

Parameters

[in]	PeiServices	General-purpose services that are available to every PEIM
[in]	This	Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
[in]	DeviceIndex	Specifies the block device to which the function wants to talk. Because the driver that implements Block I/O PPIs will manage multiple block devices, the PPIs that want to talk to a single device must specify the device index that was assigned during the enumeration process. This index is a number from one to NumberBlockDevices.
[out]	MediaInfo	The media information of the specified block media. The caller is responsible for the ownership of this data structure.

Note:: The MediaInfo structure describes an enumeration of possible block device types. This enumeration exists because no device paths are actually passed across interfaces that describe the type or class of hardware that is publishing the block I/O interface. This enumeration will allow for policy decisions in the Recovery PEIM, such as "Try to recover from legacy floppy first, LS-120 second, CD-ROM third." If there are multiple partitions abstracted by a given device type, they should be reported in ascending order; this order also applies to nested partitions, such as legacy MBR, where the outermost partitions would have precedence in the reporting order. The same logic applies to systems such as IDE that have precedence relationships like "Master/Slave" or "Primary/Secondary". The master device should be reported first, the slave second.

Return values

EFI_SUCCESS	Media information about the specified block device was obtained successfully.
EFI_DEVICE_ERROR	Cannot get the media information due to a hardware error.

Definition at line 263 of file AhciPeiBlockIo.c.

◆ AhciBlockIoGetMediaInfo2()

EFI_STATUS EFIAPI AhciBlockIoGetMediaInfo2	(	IN EFI_PEI_SERVICES **	PeiServices,
		IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *	This,
		IN UINTN	DeviceIndex,
		OUT EFI_PEI_BLOCK_IO2_MEDIA *	MediaInfo
	)

Gets a block device's media information.

This function will provide the caller with the specified block device's media information. If the media changes, calling this function will update the media information accordingly.

Parameters

[in]	PeiServices	General-purpose services that are available to every PEIM
[in]	This	Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
[in]	DeviceIndex	Specifies the block device to which the function wants to talk. Because the driver that implements Block I/O PPIs will manage multiple block devices, the PPIs that want to talk to a single device must specify the device index that was assigned during the enumeration process. This index is a number from one to NumberBlockDevices.
[out]	MediaInfo	The media information of the specified block media. The caller is responsible for the ownership of this data structure.

Note:: The MediaInfo structure describes an enumeration of possible block device types. This enumeration exists because no device paths are actually passed across interfaces that describe the type or class of hardware that is publishing the block I/O interface. This enumeration will allow for policy decisions in the Recovery PEIM, such as "Try to recover from legacy floppy first, LS-120 second, CD-ROM third." If there are multiple partitions abstracted by a given device type, they should be reported in ascending order; this order also applies to nested partitions, such as legacy MBR, where the outermost partitions would have precedence in the reporting order. The same logic applies to systems such as IDE that have precedence relationships like "Master/Slave" or "Primary/Secondary". The master device should be reported first, the slave second.

Return values

EFI_SUCCESS	Media information about the specified block device was obtained successfully.
EFI_DEVICE_ERROR	Cannot get the media information due to a hardware error.

Definition at line 431 of file AhciPeiBlockIo.c.

◆ AhciBlockIoReadBlocks()

EFI_STATUS EFIAPI AhciBlockIoReadBlocks	(	IN EFI_PEI_SERVICES **	PeiServices,
		IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *	This,
		IN UINTN	DeviceIndex,
		IN EFI_PEI_LBA	StartLBA,
		IN UINTN	BufferSize,
		OUT VOID *	Buffer
	)

Reads the requested number of blocks from the specified block device.

The function reads the requested number of blocks from the device. All the blocks are read, or an error is returned. If there is no media in the device, the function returns EFI_NO_MEDIA.

Parameters

[in]	PeiServices	General-purpose services that are available to every PEIM.
[in]	This	Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
[in]	DeviceIndex	Specifies the block device to which the function wants to talk. Because the driver that implements Block I/O PPIs will manage multiple block devices, PPIs that want to talk to a single device must specify the device index that was assigned during the enumeration process. This index is a number from one to NumberBlockDevices.
[in]	StartLBA	The starting logical block address (LBA) to read from on the device
[in]	BufferSize	The size of the Buffer in bytes. This number must be a multiple of the intrinsic block size of the device.
[out]	Buffer	A pointer to the destination buffer for the data. The caller is responsible for the ownership of the buffer.

Return values

EFI_SUCCESS	The data was read correctly from the device.
EFI_DEVICE_ERROR	The device reported an error while attempting to perform the read operation.
EFI_INVALID_PARAMETER	The read request contains LBAs that are not valid, or the buffer is not properly aligned.
EFI_NO_MEDIA	There is no media in the device.
EFI_BAD_BUFFER_SIZE	The BufferSize parameter is not a multiple of the intrinsic block size of the device.

Definition at line 327 of file AhciPeiBlockIo.c.

◆ AhciBlockIoReadBlocks2()

EFI_STATUS EFIAPI AhciBlockIoReadBlocks2	(	IN EFI_PEI_SERVICES **	PeiServices,
		IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *	This,
		IN UINTN	DeviceIndex,
		IN EFI_PEI_LBA	StartLBA,
		IN UINTN	BufferSize,
		OUT VOID *	Buffer
	)

Reads the requested number of blocks from the specified block device.

The function reads the requested number of blocks from the device. All the blocks are read, or an error is returned. If there is no media in the device, the function returns EFI_NO_MEDIA.

Parameters

[in]	PeiServices	General-purpose services that are available to every PEIM.
[in]	This	Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
[in]	DeviceIndex	Specifies the block device to which the function wants to talk. Because the driver that implements Block I/O PPIs will manage multiple block devices, PPIs that want to talk to a single device must specify the device index that was assigned during the enumeration process. This index is a number from one to NumberBlockDevices.
[in]	StartLBA	The starting logical block address (LBA) to read from on the device
[in]	BufferSize	The size of the Buffer in bytes. This number must be a multiple of the intrinsic block size of the device.
[out]	Buffer	A pointer to the destination buffer for the data. The caller is responsible for the ownership of the buffer.

Return values

EFI_SUCCESS	The data was read correctly from the device.
EFI_DEVICE_ERROR	The device reported an error while attempting to perform the read operation.
EFI_INVALID_PARAMETER	The read request contains LBAs that are not valid, or the buffer is not properly aligned.
EFI_NO_MEDIA	There is no media in the device.
EFI_BAD_BUFFER_SIZE	The BufferSize parameter is not a multiple of the intrinsic block size of the device.

Definition at line 496 of file AhciPeiBlockIo.c.

Macros

Functions

Detailed Description

Macro Definition Documentation

◆ EDKII_PEI_BLOCK_DEVICE_TYPE_ATA_HARD_DISK

Function Documentation

◆ AhciBlockIoGetDeviceNo()

◆ AhciBlockIoGetDeviceNo2()

◆ AhciBlockIoGetMediaInfo()

◆ AhciBlockIoGetMediaInfo2()

◆ AhciBlockIoReadBlocks()

◆ AhciBlockIoReadBlocks2()