IoHighLevel.c File Reference

#include "BaseIoLibIntrinsicInternal.h"

Go to the source code of this file.

Functions
UINT8 EFIAPI	IoOr8 (IN UINTN Port, IN UINT8 OrData)
UINT8 EFIAPI	IoAnd8 (IN UINTN Port, IN UINT8 AndData)
UINT8 EFIAPI	IoAndThenOr8 (IN UINTN Port, IN UINT8 AndData, IN UINT8 OrData)
UINT8 EFIAPI	IoBitFieldRead8 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit)
UINT8 EFIAPI	IoBitFieldWrite8 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 Value)
UINT8 EFIAPI	IoBitFieldOr8 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 OrData)
UINT8 EFIAPI	IoBitFieldAnd8 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData)
UINT8 EFIAPI	IoBitFieldAndThenOr8 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData, IN UINT8 OrData)
UINT16 EFIAPI	IoOr16 (IN UINTN Port, IN UINT16 OrData)
UINT16 EFIAPI	IoAnd16 (IN UINTN Port, IN UINT16 AndData)
UINT16 EFIAPI	IoAndThenOr16 (IN UINTN Port, IN UINT16 AndData, IN UINT16 OrData)
UINT16 EFIAPI	IoBitFieldRead16 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit)
UINT16 EFIAPI	IoBitFieldWrite16 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 Value)
UINT16 EFIAPI	IoBitFieldOr16 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 OrData)
UINT16 EFIAPI	IoBitFieldAnd16 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData)
UINT16 EFIAPI	IoBitFieldAndThenOr16 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData, IN UINT16 OrData)
UINT32 EFIAPI	IoOr32 (IN UINTN Port, IN UINT32 OrData)
UINT32 EFIAPI	IoAnd32 (IN UINTN Port, IN UINT32 AndData)
UINT32 EFIAPI	IoAndThenOr32 (IN UINTN Port, IN UINT32 AndData, IN UINT32 OrData)
UINT32 EFIAPI	IoBitFieldRead32 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit)
UINT32 EFIAPI	IoBitFieldWrite32 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 Value)
UINT32 EFIAPI	IoBitFieldOr32 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 OrData)
UINT32 EFIAPI	IoBitFieldAnd32 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData)
UINT32 EFIAPI	IoBitFieldAndThenOr32 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData, IN UINT32 OrData)
UINT64 EFIAPI	IoOr64 (IN UINTN Port, IN UINT64 OrData)
UINT64 EFIAPI	IoAnd64 (IN UINTN Port, IN UINT64 AndData)
UINT64 EFIAPI	IoAndThenOr64 (IN UINTN Port, IN UINT64 AndData, IN UINT64 OrData)
UINT64 EFIAPI	IoBitFieldRead64 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit)
UINT64 EFIAPI	IoBitFieldWrite64 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 Value)
UINT64 EFIAPI	IoBitFieldOr64 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 OrData)
UINT64 EFIAPI	IoBitFieldAnd64 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 AndData)
UINT64 EFIAPI	IoBitFieldAndThenOr64 (IN UINTN Port, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 AndData, IN UINT64 OrData)
UINT8 EFIAPI	MmioOr8 (IN UINTN Address, IN UINT8 OrData)
UINT8 EFIAPI	MmioAnd8 (IN UINTN Address, IN UINT8 AndData)
UINT8 EFIAPI	MmioAndThenOr8 (IN UINTN Address, IN UINT8 AndData, IN UINT8 OrData)
UINT8 EFIAPI	MmioBitFieldRead8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit)
UINT8 EFIAPI	MmioBitFieldWrite8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 Value)
UINT8 EFIAPI	MmioBitFieldOr8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 OrData)
UINT8 EFIAPI	MmioBitFieldAnd8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData)
UINT8 EFIAPI	MmioBitFieldAndThenOr8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData, IN UINT8 OrData)
UINT16 EFIAPI	MmioOr16 (IN UINTN Address, IN UINT16 OrData)
UINT16 EFIAPI	MmioAnd16 (IN UINTN Address, IN UINT16 AndData)
UINT16 EFIAPI	MmioAndThenOr16 (IN UINTN Address, IN UINT16 AndData, IN UINT16 OrData)
UINT16 EFIAPI	MmioBitFieldRead16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit)
UINT16 EFIAPI	MmioBitFieldWrite16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 Value)
UINT16 EFIAPI	MmioBitFieldOr16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 OrData)
UINT16 EFIAPI	MmioBitFieldAnd16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData)
UINT16 EFIAPI	MmioBitFieldAndThenOr16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData, IN UINT16 OrData)
UINT32 EFIAPI	MmioOr32 (IN UINTN Address, IN UINT32 OrData)
UINT32 EFIAPI	MmioAnd32 (IN UINTN Address, IN UINT32 AndData)
UINT32 EFIAPI	MmioAndThenOr32 (IN UINTN Address, IN UINT32 AndData, IN UINT32 OrData)
UINT32 EFIAPI	MmioBitFieldRead32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit)
UINT32 EFIAPI	MmioBitFieldWrite32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 Value)
UINT32 EFIAPI	MmioBitFieldOr32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 OrData)
UINT32 EFIAPI	MmioBitFieldAnd32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData)
UINT32 EFIAPI	MmioBitFieldAndThenOr32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData, IN UINT32 OrData)
UINT64 EFIAPI	MmioOr64 (IN UINTN Address, IN UINT64 OrData)
UINT64 EFIAPI	MmioAnd64 (IN UINTN Address, IN UINT64 AndData)
UINT64 EFIAPI	MmioAndThenOr64 (IN UINTN Address, IN UINT64 AndData, IN UINT64 OrData)
UINT64 EFIAPI	MmioBitFieldRead64 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit)
UINT64 EFIAPI	MmioBitFieldWrite64 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 Value)
UINT64 EFIAPI	MmioBitFieldOr64 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 OrData)
UINT64 EFIAPI	MmioBitFieldAnd64 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 AndData)
UINT64 EFIAPI	MmioBitFieldAndThenOr64 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 AndData, IN UINT64 OrData)

Detailed Description

High-level Io/Mmio functions.

All assertions for bit field operations are handled bit field functions in the Base Library.

Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent

The following IoLib instances contain the same copy of this file:

BaseIoLibIntrinsic DxeIoLibCpuIo PeiIoLibCpuIo

Definition in file IoHighLevel.c.

Function Documentation

IoAnd16()

UINT16 EFIAPI IoAnd16	(	IN UINTN	Port,
		IN UINT16	AndData
	)

Reads a 16-bit I/O port, performs a bitwise AND, and writes the result back to the 16-bit I/O port.

Reads the 16-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 16-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
AndData	The value to AND with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 354 of file IoHighLevel.c.

IoAnd32()

UINT32 EFIAPI IoAnd32	(	IN UINTN	Port,
		IN UINT32	AndData
	)

Reads a 32-bit I/O port, performs a bitwise AND, and writes the result back to the 32-bit I/O port.

Reads the 32-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 32-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
AndData	The value to AND with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 647 of file IoHighLevel.c.

IoAnd64()

UINT64 EFIAPI IoAnd64	(	IN UINTN	Port,
		IN UINT64	AndData
	)

Reads a 64-bit I/O port, performs a bitwise AND, and writes the result back to the 64-bit I/O port.

Reads the 64-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 64-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 64-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 64-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
AndData	The value to AND with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 940 of file IoHighLevel.c.

IoAnd8()

UINT8 EFIAPI IoAnd8	(	IN UINTN	Port,
		IN UINT8	AndData
	)

Reads an 8-bit I/O port, performs a bitwise AND, and writes the result back to the 8-bit I/O port.

Reads the 8-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 8-bit I/O port operations are not supported, then ASSERT().

Parameters

Port	The I/O port to write.
AndData	The value to AND with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 68 of file IoHighLevel.c.

IoAndThenOr16()

UINT16 EFIAPI IoAndThenOr16	(	IN UINTN	Port,
		IN UINT16	AndData,
		IN UINT16	OrData
	)

Reads a 16-bit I/O port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the 16-bit I/O port.

Reads the 16-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 16-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 16-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
AndData	The value to AND with the read value from the I/O port.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the I/O port.

Definition at line 385 of file IoHighLevel.c.

IoAndThenOr32()

UINT32 EFIAPI IoAndThenOr32	(	IN UINTN	Port,
		IN UINT32	AndData,
		IN UINT32	OrData
	)

Reads a 32-bit I/O port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the 32-bit I/O port.

Reads the 32-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 32-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 32-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
AndData	The value to AND with the read value from the I/O port.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the I/O port.

Definition at line 678 of file IoHighLevel.c.

IoAndThenOr64()

UINT64 EFIAPI IoAndThenOr64	(	IN UINTN	Port,
		IN UINT64	AndData,
		IN UINT64	OrData
	)

Reads a 64-bit I/O port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the 64-bit I/O port.

Reads the 64-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 64-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 64-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 64-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
AndData	The value to AND with the read value from the I/O port.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the I/O port.

Definition at line 971 of file IoHighLevel.c.

IoAndThenOr8()

UINT8 EFIAPI IoAndThenOr8	(	IN UINTN	Port,
		IN UINT8	AndData,
		IN UINT8	OrData
	)

Reads an 8-bit I/O port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the 8-bit I/O port.

Reads the 8-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 8-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 8-bit I/O port operations are not supported, then ASSERT().

Parameters

Port	The I/O port to write.
AndData	The value to AND with the read value from the I/O port.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the I/O port.

Definition at line 98 of file IoHighLevel.c.

IoBitFieldAnd16()

UINT16 EFIAPI IoBitFieldAnd16	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	AndData
	)

Reads a bit field in a 16-bit port, performs a bitwise AND, and writes the result back to the bit field in the 16-bit port.

Reads the 16-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in AndData are stripped.

If 16-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
AndData	The value to AND with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 537 of file IoHighLevel.c.

IoBitFieldAnd32()

UINT32 EFIAPI IoBitFieldAnd32	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	AndData
	)

Reads a bit field in a 32-bit port, performs a bitwise AND, and writes the result back to the bit field in the 32-bit port.

Reads the 32-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in AndData are stripped.

If 32-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
AndData	The value to AND with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 830 of file IoHighLevel.c.

IoBitFieldAnd64()

UINT64 EFIAPI IoBitFieldAnd64	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT64	AndData
	)

Reads a bit field in a 64-bit port, performs a bitwise AND, and writes the result back to the bit field in the 64-bit port.

Reads the 64-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 64-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in AndData are stripped.

If 64-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.
AndData	The value to AND with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 1123 of file IoHighLevel.c.

IoBitFieldAnd8()

UINT8 EFIAPI IoBitFieldAnd8	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	AndData
	)

Reads a bit field in an 8-bit port, performs a bitwise AND, and writes the result back to the bit field in the 8-bit port.

Reads the 8-bit I/O port specified by Port, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in AndData are stripped.

If 8-bit I/O port operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
AndData	The value to AND with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 245 of file IoHighLevel.c.

IoBitFieldAndThenOr16()

UINT16 EFIAPI IoBitFieldAndThenOr16	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	AndData,
		IN UINT16	OrData
	)

Reads a bit field in a 16-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 16-bit port.

Reads the 16-bit I/O port specified by Port, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 16-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in both AndData and OrData are stripped.

If 16-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
AndData	The value to AND with the read value from the I/O port.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the I/O port.

Definition at line 583 of file IoHighLevel.c.

IoBitFieldAndThenOr32()

UINT32 EFIAPI IoBitFieldAndThenOr32	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	AndData,
		IN UINT32	OrData
	)

Reads a bit field in a 32-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 32-bit port.

Reads the 32-bit I/O port specified by Port, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 32-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in both AndData and OrData are stripped.

If 32-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
AndData	The value to AND with the read value from the I/O port.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the I/O port.

Definition at line 876 of file IoHighLevel.c.

IoBitFieldAndThenOr64()

UINT64 EFIAPI IoBitFieldAndThenOr64	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT64	AndData,
		IN UINT64	OrData
	)

Reads a bit field in a 64-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 64-bit port.

Reads the 64-bit I/O port specified by Port, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 64-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in both AndData and OrData are stripped.

If 64-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.
AndData	The value to AND with the read value from the I/O port.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the I/O port.

Definition at line 1169 of file IoHighLevel.c.

IoBitFieldAndThenOr8()

UINT8 EFIAPI IoBitFieldAndThenOr8	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	AndData,
		IN UINT8	OrData
	)

Reads a bit field in an 8-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 8-bit port.

Reads the 8-bit I/O port specified by Port, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 8-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in both AndData and OrData are stripped.

If 8-bit I/O port operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
AndData	The value to AND with the read value from the I/O port.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the I/O port.

Definition at line 290 of file IoHighLevel.c.

IoBitFieldOr16()

UINT16 EFIAPI IoBitFieldOr16	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	OrData
	)

Reads a bit field in a 16-bit port, performs a bitwise OR, and writes the result back to the bit field in the 16-bit port.

Reads the 16-bit I/O port specified by Port, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 16-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in OrData are stripped.

If 16-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
OrData	The value to OR with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 495 of file IoHighLevel.c.

IoBitFieldOr32()

UINT32 EFIAPI IoBitFieldOr32	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	OrData
	)

Reads a bit field in a 32-bit port, performs a bitwise OR, and writes the result back to the bit field in the 32-bit port.

Reads the 32-bit I/O port specified by Port, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 32-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in OrData are stripped.

If 32-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
OrData	The value to OR with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 788 of file IoHighLevel.c.

IoBitFieldOr64()

UINT64 EFIAPI IoBitFieldOr64	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT64	OrData
	)

Reads a bit field in a 64-bit port, performs a bitwise OR, and writes the result back to the bit field in the 64-bit port.

Reads the 64-bit I/O port specified by Port, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 64-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in OrData are stripped.

If 64-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.
OrData	The value to OR with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 1081 of file IoHighLevel.c.

IoBitFieldOr8()

UINT8 EFIAPI IoBitFieldOr8	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	OrData
	)

Reads a bit field in an 8-bit port, performs a bitwise OR, and writes the result back to the bit field in the 8-bit port.

Reads the 8-bit I/O port specified by Port, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 8-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized. Extra bits left in OrData are stripped.

If 8-bit I/O port operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
OrData	The value to OR with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 204 of file IoHighLevel.c.

IoBitFieldRead16()

UINT16 EFIAPI IoBitFieldRead16	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of an I/O register.

Reads the bit field in a 16-bit I/O register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If 16-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Port	The I/O port to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.

Returns

The value read.

Definition at line 417 of file IoHighLevel.c.

IoBitFieldRead32()

UINT32 EFIAPI IoBitFieldRead32	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of an I/O register.

Reads the bit field in a 32-bit I/O register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If 32-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Port	The I/O port to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.

Returns

The value read.

Definition at line 710 of file IoHighLevel.c.

IoBitFieldRead64()

UINT64 EFIAPI IoBitFieldRead64	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of an I/O register.

Reads the bit field in a 64-bit I/O register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If 64-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Port	The I/O port to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.

Returns

The value read.

Definition at line 1003 of file IoHighLevel.c.

IoBitFieldRead8()

UINT8 EFIAPI IoBitFieldRead8	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of an I/O register.

Reads the bit field in an 8-bit I/O register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If 8-bit I/O port operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Port	The I/O port to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.

Returns

The value read.

Definition at line 129 of file IoHighLevel.c.

IoBitFieldWrite16()

UINT16 EFIAPI IoBitFieldWrite16	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	Value
	)

Writes a bit field to an I/O register.

Writes Value to the bit field of the I/O register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination I/O register are preserved. The value written to the I/O port is returned. Extra bits left in Value are stripped.

If 16-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
Value	The new value of the bit field.

Returns

The value written back to the I/O port.

Definition at line 453 of file IoHighLevel.c.

IoBitFieldWrite32()

UINT32 EFIAPI IoBitFieldWrite32	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	Value
	)

Writes a bit field to an I/O register.

Writes Value to the bit field of the I/O register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination I/O register are preserved. The value written to the I/O port is returned. Extra bits left in Value are stripped.

If 32-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
Value	The new value of the bit field.

Returns

The value written back to the I/O port.

Definition at line 746 of file IoHighLevel.c.

IoBitFieldWrite64()

UINT64 EFIAPI IoBitFieldWrite64	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT64	Value
	)

Writes a bit field to an I/O register.

Writes Value to the bit field of the I/O register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination I/O register are preserved. The value written to the I/O port is returned. Extra bits left in Value are stripped.

If 64-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.
Value	The new value of the bit field.

Returns

The value written back to the I/O port.

Definition at line 1039 of file IoHighLevel.c.

IoBitFieldWrite8()

UINT8 EFIAPI IoBitFieldWrite8	(	IN UINTN	Port,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	Value
	)

Writes a bit field to an I/O register.

Writes Value to the bit field of the I/O register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination I/O register are preserved. The value written to the I/O port is returned.

If 8-bit I/O port operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Port	The I/O port to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
Value	The new value of the bit field.

Returns

The value written back to the I/O port.

Definition at line 163 of file IoHighLevel.c.

IoOr16()

UINT16 EFIAPI IoOr16	(	IN UINTN	Port,
		IN UINT16	OrData
	)

Reads a 16-bit I/O port, performs a bitwise OR, and writes the result back to the 16-bit I/O port.

Reads the 16-bit I/O port specified by Port, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 16-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 16-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
OrData	The value to OR with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 325 of file IoHighLevel.c.

IoOr32()

UINT32 EFIAPI IoOr32	(	IN UINTN	Port,
		IN UINT32	OrData
	)

Reads a 32-bit I/O port, performs a bitwise OR, and writes the result back to the 32-bit I/O port.

Reads the 32-bit I/O port specified by Port, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 32-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 32-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
OrData	The value to OR with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 618 of file IoHighLevel.c.

IoOr64()

UINT64 EFIAPI IoOr64	(	IN UINTN	Port,
		IN UINT64	OrData
	)

Reads a 64-bit I/O port, performs a bitwise OR, and writes the result back to the 64-bit I/O port.

Reads the 64-bit I/O port specified by Port, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 64-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 64-bit I/O port operations are not supported, then ASSERT(). If Port is not aligned on a 64-bit boundary, then ASSERT().

Parameters

Port	The I/O port to write.
OrData	The value to OR with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 911 of file IoHighLevel.c.

IoOr8()

UINT8 EFIAPI IoOr8	(	IN UINTN	Port,
		IN UINT8	OrData
	)

Reads an 8-bit I/O port, performs a bitwise OR, and writes the result back to the 8-bit I/O port.

Reads the 8-bit I/O port specified by Port, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 8-bit I/O port specified by Port. The value written to the I/O port is returned. This function must guarantee that all I/O read and write operations are serialized.

If 8-bit I/O port operations are not supported, then ASSERT().

Parameters

Port	The I/O port to write.
OrData	The value to OR with the read value from the I/O port.

Returns

The value written back to the I/O port.

Definition at line 40 of file IoHighLevel.c.

MmioAnd16()

UINT16 EFIAPI MmioAnd16	(	IN UINTN	Address,
		IN UINT16	AndData
	)

Reads a 16-bit MMIO register, performs a bitwise AND, and writes the result back to the 16-bit MMIO register.

Reads the 16-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 16-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
AndData	The value to AND with the read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1520 of file IoHighLevel.c.

MmioAnd32()

UINT32 EFIAPI MmioAnd32	(	IN UINTN	Address,
		IN UINT32	AndData
	)

Reads a 32-bit MMIO register, performs a bitwise AND, and writes the result back to the 32-bit MMIO register.

Reads the 32-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 32-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
AndData	The value to AND with the read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1814 of file IoHighLevel.c.

MmioAnd64()

UINT64 EFIAPI MmioAnd64	(	IN UINTN	Address,
		IN UINT64	AndData
	)

Reads a 64-bit MMIO register, performs a bitwise AND, and writes the result back to the 64-bit MMIO register.

Reads the 64-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 64-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 64-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 64-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
AndData	The value to AND with the read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 2108 of file IoHighLevel.c.

MmioAnd8()

UINT8 EFIAPI MmioAnd8	(	IN UINTN	Address,
		IN UINT8	AndData
	)

Reads an 8-bit MMIO register, performs a bitwise AND, and writes the result back to the 8-bit MMIO register.

Reads the 8-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 8-bit MMIO register operations are not supported, then ASSERT().

Parameters

Address	The MMIO register to write.
AndData	The value to AND with the read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1231 of file IoHighLevel.c.

MmioAndThenOr16()

UINT16 EFIAPI MmioAndThenOr16	(	IN UINTN	Address,
		IN UINT16	AndData,
		IN UINT16	OrData
	)

Reads a 16-bit MMIO register, performs a bitwise AND followed by a bitwise OR, and writes the result back to the 16-bit MMIO register.

Reads the 16-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 16-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 16-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
AndData	The value to AND with the read value from the MMIO register.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the MMIO register.

Definition at line 1551 of file IoHighLevel.c.

MmioAndThenOr32()

UINT32 EFIAPI MmioAndThenOr32	(	IN UINTN	Address,
		IN UINT32	AndData,
		IN UINT32	OrData
	)

Reads a 32-bit MMIO register, performs a bitwise AND followed by a bitwise OR, and writes the result back to the 32-bit MMIO register.

Reads the 32-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 32-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 32-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
AndData	The value to AND with the read value from the MMIO register.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the MMIO register.

Definition at line 1845 of file IoHighLevel.c.

MmioAndThenOr64()

UINT64 EFIAPI MmioAndThenOr64	(	IN UINTN	Address,
		IN UINT64	AndData,
		IN UINT64	OrData
	)

Reads a 64-bit MMIO register, performs a bitwise AND followed by a bitwise OR, and writes the result back to the 64-bit MMIO register.

Reads the 64-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 64-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 64-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 64-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
AndData	The value to AND with the read value from the MMIO register.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the MMIO register.

Definition at line 2139 of file IoHighLevel.c.

MmioAndThenOr8()

UINT8 EFIAPI MmioAndThenOr8	(	IN UINTN	Address,
		IN UINT8	AndData,
		IN UINT8	OrData
	)

Reads an 8-bit MMIO register, performs a bitwise AND followed by a bitwise OR, and writes the result back to the 8-bit MMIO register.

Reads the 8-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 8-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 8-bit MMIO register operations are not supported, then ASSERT().

Parameters

Address	The MMIO register to write.
AndData	The value to AND with the read value from the MMIO register.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the MMIO register.

Definition at line 1262 of file IoHighLevel.c.

MmioBitFieldAnd16()

UINT16 EFIAPI MmioBitFieldAnd16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	AndData
	)

Reads a bit field in a 16-bit MMIO register, performs a bitwise AND, and writes the result back to the bit field in the 16-bit MMIO register.

Reads the 16-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in AndData are stripped.

If 16-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
AndData	The value to AND with read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1704 of file IoHighLevel.c.

MmioBitFieldAnd32()

UINT32 EFIAPI MmioBitFieldAnd32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	AndData
	)

Reads a bit field in a 32-bit MMIO register, performs a bitwise AND, and writes the result back to the bit field in the 32-bit MMIO register.

Reads the 32-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in AndData are stripped.

If 32-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
AndData	The value to AND with read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1998 of file IoHighLevel.c.

MmioBitFieldAnd64()

UINT64 EFIAPI MmioBitFieldAnd64	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT64	AndData
	)

Reads a bit field in a 64-bit MMIO register, performs a bitwise AND, and writes the result back to the bit field in the 64-bit MMIO register.

Reads the 64-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 64-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in AndData are stripped.

If 64-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.
AndData	The value to AND with read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 2292 of file IoHighLevel.c.

MmioBitFieldAnd8()

UINT8 EFIAPI MmioBitFieldAnd8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	AndData
	)

Reads a bit field in an 8-bit MMIO register, performs a bitwise AND, and writes the result back to the bit field in the 8-bit MMIO register.

Reads the 8-bit MMIO register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in AndData are stripped.

If 8-bit MMIO register operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
AndData	The value to AND with read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1411 of file IoHighLevel.c.

MmioBitFieldAndThenOr16()

UINT16 EFIAPI MmioBitFieldAndThenOr16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	AndData,
		IN UINT16	OrData
	)

Reads a bit field in a 16-bit MMIO register, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 16-bit MMIO register.

Reads the 16-bit MMIO register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 16-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in both AndData and OrData are stripped.

If 16-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
AndData	The value to AND with read value from the MMIO register.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the MMIO register.

Definition at line 1750 of file IoHighLevel.c.

MmioBitFieldAndThenOr32()

UINT32 EFIAPI MmioBitFieldAndThenOr32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	AndData,
		IN UINT32	OrData
	)

Reads a bit field in a 32-bit MMIO register, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 32-bit MMIO register.

Reads the 32-bit MMIO register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 32-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in both AndData and OrData are stripped.

If 32-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
AndData	The value to AND with read value from the MMIO register.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the MMIO register.

Definition at line 2044 of file IoHighLevel.c.

MmioBitFieldAndThenOr64()

UINT64 EFIAPI MmioBitFieldAndThenOr64	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT64	AndData,
		IN UINT64	OrData
	)

Reads a bit field in a 64-bit MMIO register, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 64-bit MMIO register.

Reads the 64-bit MMIO register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 64-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in both AndData and OrData are stripped.

If 64-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.
AndData	The value to AND with read value from the MMIO register.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the MMIO register.

Definition at line 2338 of file IoHighLevel.c.

MmioBitFieldAndThenOr8()

UINT8 EFIAPI MmioBitFieldAndThenOr8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	AndData,
		IN UINT8	OrData
	)

Reads a bit field in an 8-bit MMIO register, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 8-bit MMIO register.

Reads the 8-bit MMIO register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 8-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in both AndData and OrData are stripped.

If 8-bit MMIO register operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
AndData	The value to AND with read value from the MMIO register.
OrData	The value to OR with the result of the AND operation.

Returns

The value written back to the MMIO register.

Definition at line 1456 of file IoHighLevel.c.

MmioBitFieldOr16()

UINT16 EFIAPI MmioBitFieldOr16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	OrData
	)

Reads a bit field in a 16-bit MMIO register, performs a bitwise OR, and writes the result back to the bit field in the 16-bit MMIO register.

Reads the 16-bit MMIO register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 16-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in OrData are stripped.

If 16-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
OrData	The value to OR with read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1661 of file IoHighLevel.c.

MmioBitFieldOr32()

UINT32 EFIAPI MmioBitFieldOr32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	OrData
	)

Reads a bit field in a 32-bit MMIO register, performs a bitwise OR, and writes the result back to the bit field in the 32-bit MMIO register.

Reads the 32-bit MMIO register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 32-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in OrData are stripped.

If 32-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
OrData	The value to OR with read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1955 of file IoHighLevel.c.

MmioBitFieldOr64()

UINT64 EFIAPI MmioBitFieldOr64	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT64	OrData
	)

Reads a bit field in a 64-bit MMIO register, performs a bitwise OR, and writes the result back to the bit field in the 64-bit MMIO register.

Reads the 64-bit MMIO register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 64-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in OrData are stripped.

If 64-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.
OrData	The value to OR with read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 2249 of file IoHighLevel.c.

MmioBitFieldOr8()

UINT8 EFIAPI MmioBitFieldOr8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	OrData
	)

Reads a bit field in an 8-bit MMIO register, performs a bitwise OR, and writes the result back to the bit field in the 8-bit MMIO register.

Reads the 8-bit MMIO register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 8-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized. Extra bits left in OrData are stripped.

If 8-bit MMIO register operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
OrData	The value to OR with read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1369 of file IoHighLevel.c.

MmioBitFieldRead16()

UINT16 EFIAPI MmioBitFieldRead16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a MMIO register.

Reads the bit field in a 16-bit MMIO register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If 16-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	The MMIO register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.

Returns

The value read.

Definition at line 1583 of file IoHighLevel.c.

MmioBitFieldRead32()

UINT32 EFIAPI MmioBitFieldRead32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a MMIO register.

Reads the bit field in a 32-bit MMIO register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If 32-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	The MMIO register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.

Returns

The value read.

Definition at line 1877 of file IoHighLevel.c.

MmioBitFieldRead64()

UINT64 EFIAPI MmioBitFieldRead64	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a MMIO register.

Reads the bit field in a 64-bit MMIO register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If 64-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	The MMIO register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.

Returns

The value read.

Definition at line 2171 of file IoHighLevel.c.

MmioBitFieldRead8()

UINT8 EFIAPI MmioBitFieldRead8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a MMIO register.

Reads the bit field in an 8-bit MMIO register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If 8-bit MMIO register operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	The MMIO register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.

Returns

The value read.

Definition at line 1293 of file IoHighLevel.c.

MmioBitFieldWrite16()

UINT16 EFIAPI MmioBitFieldWrite16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	Value
	)

Writes a bit field to a MMIO register.

Writes Value to the bit field of the MMIO register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination MMIO register are preserved. The new value of the 16-bit register is returned.

If 16-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
Value	The new value of the bit field.

Returns

The value written back to the MMIO register.

Definition at line 1618 of file IoHighLevel.c.

MmioBitFieldWrite32()

UINT32 EFIAPI MmioBitFieldWrite32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	Value
	)

Writes a bit field to a MMIO register.

Writes Value to the bit field of the MMIO register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination MMIO register are preserved. The new value of the 32-bit register is returned.

If 32-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
Value	The new value of the bit field.

Returns

The value written back to the MMIO register.

Definition at line 1912 of file IoHighLevel.c.

MmioBitFieldWrite64()

UINT64 EFIAPI MmioBitFieldWrite64	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT64	Value
	)

Writes a bit field to a MMIO register.

Writes Value to the bit field of the MMIO register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination MMIO register are preserved. The new value of the 64-bit register is returned.

If 64-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 64-bit boundary, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..63.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..63.
Value	The new value of the bit field.

Returns

The value written back to the MMIO register.

Definition at line 2206 of file IoHighLevel.c.

MmioBitFieldWrite8()

UINT8 EFIAPI MmioBitFieldWrite8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	Value
	)

Writes a bit field to a MMIO register.

Writes Value to the bit field of the MMIO register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination MMIO register are preserved. The new value of the 8-bit register is returned.

If 8-bit MMIO register operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	The MMIO register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
Value	The new value of the bit field.

Returns

The value written back to the MMIO register.

Definition at line 1327 of file IoHighLevel.c.

MmioOr16()

UINT16 EFIAPI MmioOr16	(	IN UINTN	Address,
		IN UINT16	OrData
	)

Reads a 16-bit MMIO register, performs a bitwise OR, and writes the result back to the 16-bit MMIO register.

Reads the 16-bit MMIO register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 16-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 16-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
OrData	The value to OR with the read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1491 of file IoHighLevel.c.

MmioOr32()

UINT32 EFIAPI MmioOr32	(	IN UINTN	Address,
		IN UINT32	OrData
	)

Reads a 32-bit MMIO register, performs a bitwise OR, and writes the result back to the 32-bit MMIO register.

Reads the 32-bit MMIO register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 32-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 32-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
OrData	The value to OR with the read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1785 of file IoHighLevel.c.

MmioOr64()

UINT64 EFIAPI MmioOr64	(	IN UINTN	Address,
		IN UINT64	OrData
	)

Reads a 64-bit MMIO register, performs a bitwise OR, and writes the result back to the 64-bit MMIO register.

Reads the 64-bit MMIO register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 64-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 64-bit MMIO register operations are not supported, then ASSERT(). If Address is not aligned on a 64-bit boundary, then ASSERT().

Parameters

Address	The MMIO register to write.
OrData	The value to OR with the read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 2079 of file IoHighLevel.c.

MmioOr8()

UINT8 EFIAPI MmioOr8	(	IN UINTN	Address,
		IN UINT8	OrData
	)

Reads an 8-bit MMIO register, performs a bitwise OR, and writes the result back to the 8-bit MMIO register.

Reads the 8-bit MMIO register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 8-bit MMIO register specified by Address. The value written to the MMIO register is returned. This function must guarantee that all MMIO read and write operations are serialized.

If 8-bit MMIO register operations are not supported, then ASSERT().

Parameters

Address	The MMIO register to write.
OrData	The value to OR with the read value from the MMIO register.

Returns

The value written back to the MMIO register.

Definition at line 1203 of file IoHighLevel.c.