DMA abstraction library APIs. Based on UEFI PCI IO protocol DMA abstractions. At some point these functions will probably end up in a non PCI protocol for embedded systems.
DMA Bus Master Read Operation: Call DmaMap() for MapOperationBusMasterRead. Program the DMA Bus Master with the DeviceAddress returned by DmaMap(). Start the DMA Bus Master. Wait for DMA Bus Master to complete the read operation. Call DmaUnmap().
DMA Bus Master Write Operation: Call DmaMap() for MapOperationBusMasterWrite. Program the DMA Bus Master with the DeviceAddress returned by DmaMap(). Start the DMA Bus Master. Wait for DMA Bus Master to complete the write operation. Call DmaUnmap().
DMA Bus Master Common Buffer Operation: Call DmaAllocateBuffer() to allocate a common buffer. Call DmaMap() for MapOperationBusMasterCommonBuffer. Program the DMA Bus Master with the DeviceAddress returned by DmaMap(). The common buffer can now be accessed equally by the processor and the DMA bus master. Call DmaUnmap(). Call DmaFreeBuffer().
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
Definition in file DmaLib.h.
Provides the DMA controller-specific addresses needed to access system memory.
Operation is relative to the DMA bus master.
- Parameters
-
Operation | Indicates if the bus master is going to read or write to system memory. |
HostAddress | The system memory address to map to the DMA controller. |
NumberOfBytes | On input the number of bytes to map. On output the number of bytes that were mapped. |
DeviceAddress | The resulting map address for the bus master controller to use to access the hosts HostAddress. |
Mapping | A resulting value to pass to DmaUnmap(). |
- Return values
-
EFI_SUCCESS | The range was mapped for the returned NumberOfBytes. |
EFI_UNSUPPORTED | The HostAddress cannot be mapped as a common buffer. |
EFI_INVALID_PARAMETER | One or more parameters are invalid. |
EFI_OUT_OF_RESOURCES | The request could not be completed due to a lack of resources. |
EFI_DEVICE_ERROR | The system hardware could not map the requested address. |
Provides the DMA controller-specific addresses needed to access system memory.
Operation is relative to the DMA bus master.
- Parameters
-
Operation | Indicates if the bus master is going to read or write to system memory. |
HostAddress | The system memory address to map to the DMA controller. |
NumberOfBytes | On input the number of bytes to map. On output the number of bytes that were mapped. |
DeviceAddress | The resulting map address for the bus master controller to use to access the hosts HostAddress. |
Mapping | A resulting value to pass to Unmap(). |
- Return values
-
EFI_SUCCESS | The range was mapped for the returned NumberOfBytes. |
EFI_UNSUPPORTED | The HostAddress cannot be mapped as a common buffer. |
EFI_INVALID_PARAMETER | One or more parameters are invalid. |
EFI_OUT_OF_RESOURCES | The request could not be completed due to a lack of resources. |
EFI_DEVICE_ERROR | The system hardware could not map the requested address. |
Provides the DMA controller-specific addresses needed to access system memory.
Operation is relative to the DMA bus master.
- Parameters
-
Operation | Indicates if the bus master is going to read or write to system memory. |
HostAddress | The system memory address to map to the DMA controller. |
NumberOfBytes | On input the number of bytes to map. On output the number of bytes that were mapped. |
DeviceAddress | The resulting map address for the bus master controller to use to access the host's HostAddress. |
Mapping | A resulting value to pass to Unmap(). |
- Return values
-
EFI_SUCCESS | The range was mapped for the returned NumberOfBytes. |
EFI_UNSUPPORTED | The HostAddress cannot be mapped as a common buffer. |
EFI_INVALID_PARAMETER | One or more parameters are invalid. |
EFI_OUT_OF_RESOURCES | The request could not be completed due to a lack of resources. |
EFI_DEVICE_ERROR | The system hardware could not map the requested address. |
Definition at line 46 of file CoherentDmaLib.c.
Completes the DmaMapBusMasterRead, DmaMapBusMasterWrite, or DmaMapBusMasterCommonBuffer operation and releases any corresponding resources.
- Parameters
-
Mapping | The mapping value returned from DmaMap(). |
- Return values
-
EFI_SUCCESS | The range was unmapped. |
EFI_DEVICE_ERROR | The data was not committed to the target system memory. |
Completes the DmaMapBusMasterRead(), DmaMapBusMasterWrite(), or DmaMapBusMasterCommonBuffer() operation and releases any corresponding resources.
- Parameters
-
Mapping | The mapping value returned from DmaMap*(). |
- Return values
-
EFI_SUCCESS | The range was unmapped. |
EFI_DEVICE_ERROR | The data was not committed to the target system memory. |
Completes the DmaMapBusMasterRead(), DmaMapBusMasterWrite(), or DmaMapBusMasterCommonBuffer() operation and releases any corresponding resources.
- Parameters
-
Mapping | The mapping value returned from DmaMap*(). |
- Return values
-
EFI_SUCCESS | The range was unmapped. |
EFI_DEVICE_ERROR | The data was not committed to the target system memory. |
EFI_INVALID_PARAMETER | An inconsistency was detected between the mapping type and the DoubleBuffer field |
Definition at line 79 of file CoherentDmaLib.c.