TianoCore EDK2 master
Loading...
Searching...
No Matches
DnsDriver.h File Reference

Go to the source code of this file.

Data Structures

struct  _DNS_DRIVER_DATA
 
struct  _DNS_SERVICE
 
struct  _DNS_INSTANCE
 
struct  DNS_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT
 

Macros

#define DNS_SERVICE_SIGNATURE   SIGNATURE_32 ('D', 'N', 'S', 'S')
 
#define DNS_INSTANCE_SIGNATURE   SIGNATURE_32 ('D', 'N', 'S', 'I')
 
#define DNS_SERVICE_FROM_THIS(a)    CR (a, DNS_SERVICE, ServiceBinding, DNS_SERVICE_SIGNATURE)
 
#define DNS_INSTANCE_FROM_THIS_PROTOCOL4(a)    CR (a, DNS_INSTANCE, Dns4, DNS_INSTANCE_SIGNATURE)
 
#define DNS_INSTANCE_FROM_THIS_PROTOCOL6(a)    CR (a, DNS_INSTANCE, Dns6, DNS_INSTANCE_SIGNATURE)
 

Typedefs

typedef struct _DNS_DRIVER_DATA DNS_DRIVER_DATA
 
typedef struct _DNS_SERVICE DNS_SERVICE
 
typedef struct _DNS_INSTANCE DNS_INSTANCE
 

Functions

VOID DnsDestroyInstance (IN DNS_INSTANCE *Instance)
 
EFI_STATUS DnsCreateInstance (IN DNS_SERVICE *Service, OUT DNS_INSTANCE **Instance)
 
EFI_STATUS EFIAPI DnsDestroyChildEntryInHandleBuffer (IN LIST_ENTRY *Entry, IN VOID *Context)
 
EFI_STATUS EFIAPI DnsConfigNullUdp (IN UDP_IO *UdpIo, IN VOID *Context)
 
VOID DnsDestroyService (IN DNS_SERVICE *DnsSb)
 
EFI_STATUS DnsCreateService (IN EFI_HANDLE Controller, IN EFI_HANDLE Image, IN UINT8 IpVersion, OUT DNS_SERVICE **Service)
 
EFI_STATUS EFIAPI DnsUnload (IN EFI_HANDLE ImageHandle)
 
EFI_STATUS EFIAPI DnsDriverEntryPoint (IN EFI_HANDLE ImageHandle, IN EFI_SYSTEM_TABLE *SystemTable)
 
EFI_STATUS EFIAPI Dns4DriverBindingSupported (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL)
 
EFI_STATUS EFIAPI Dns4DriverBindingStart (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL)
 
EFI_STATUS EFIAPI Dns4DriverBindingStop (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN UINTN NumberOfChildren, IN EFI_HANDLE *ChildHandleBuffer OPTIONAL)
 
EFI_STATUS EFIAPI Dns6DriverBindingSupported (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL)
 
EFI_STATUS EFIAPI Dns6DriverBindingStart (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL)
 
EFI_STATUS EFIAPI Dns6DriverBindingStop (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN UINTN NumberOfChildren, IN EFI_HANDLE *ChildHandleBuffer OPTIONAL)
 
EFI_STATUS EFIAPI Dns4ServiceBindingCreateChild (IN EFI_SERVICE_BINDING_PROTOCOL *This, IN EFI_HANDLE *ChildHandle)
 
EFI_STATUS EFIAPI Dns4ServiceBindingDestroyChild (IN EFI_SERVICE_BINDING_PROTOCOL *This, IN EFI_HANDLE ChildHandle)
 
EFI_STATUS EFIAPI Dns6ServiceBindingCreateChild (IN EFI_SERVICE_BINDING_PROTOCOL *This, IN EFI_HANDLE *ChildHandle)
 
EFI_STATUS EFIAPI Dns6ServiceBindingDestroyChild (IN EFI_SERVICE_BINDING_PROTOCOL *This, IN EFI_HANDLE ChildHandle)
 

Variables

DNS_DRIVER_DATAmDriverData
 

Detailed Description

The header files of the driver binding and service binding protocol for DnsDxe driver.

Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent

Definition in file DnsDriver.h.

Macro Definition Documentation

◆ DNS_INSTANCE_FROM_THIS_PROTOCOL4

#define DNS_INSTANCE_FROM_THIS_PROTOCOL4 (   a)     CR (a, DNS_INSTANCE, Dns4, DNS_INSTANCE_SIGNATURE)

Definition at line 100 of file DnsDriver.h.

◆ DNS_INSTANCE_FROM_THIS_PROTOCOL6

#define DNS_INSTANCE_FROM_THIS_PROTOCOL6 (   a)     CR (a, DNS_INSTANCE, Dns6, DNS_INSTANCE_SIGNATURE)

Definition at line 103 of file DnsDriver.h.

◆ DNS_INSTANCE_SIGNATURE

#define DNS_INSTANCE_SIGNATURE   SIGNATURE_32 ('D', 'N', 'S', 'I')

Definition at line 32 of file DnsDriver.h.

◆ DNS_SERVICE_FROM_THIS

#define DNS_SERVICE_FROM_THIS (   a)     CR (a, DNS_SERVICE, ServiceBinding, DNS_SERVICE_SIGNATURE)

Definition at line 97 of file DnsDriver.h.

◆ DNS_SERVICE_SIGNATURE

#define DNS_SERVICE_SIGNATURE   SIGNATURE_32 ('D', 'N', 'S', 'S')

Definition at line 30 of file DnsDriver.h.

Typedef Documentation

◆ DNS_DRIVER_DATA

Dns service block

Definition at line 18 of file DnsDriver.h.

◆ DNS_INSTANCE

typedef struct _DNS_INSTANCE DNS_INSTANCE

Dns instance block

Definition at line 28 of file DnsDriver.h.

◆ DNS_SERVICE

typedef struct _DNS_SERVICE DNS_SERVICE

Dns service block

Definition at line 23 of file DnsDriver.h.

Function Documentation

◆ Dns4DriverBindingStart()

EFI_STATUS EFIAPI Dns4DriverBindingStart ( IN EFI_DRIVER_BINDING_PROTOCOL This,
IN EFI_HANDLE  ControllerHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath  OPTIONAL 
)

Starts a device controller or a bus controller.

The Start() function is designed to be invoked from the EFI boot service ConnectController(). As a result, much of the error checking on the parameters to Start() has been moved into this common boot service. It is legal to call Start() from other locations, but the following calling restrictions must be followed, or the system behavior will not be deterministic.

  1. ControllerHandle must be a valid EFI_HANDLE.
  2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned EFI_DEVICE_PATH_PROTOCOL.
  3. Prior to calling Start(), the Supported() function for the driver specified by This must have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
Parameters
[in]ThisA pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]ControllerHandleThe handle of the controller to start. This handle must support a protocol interface that supplies an I/O abstraction to the driver.
[in]RemainingDevicePathA pointer to the remaining portion of a device path. This parameter is ignored by device drivers, and is optional for bus drivers. For a bus driver, if this parameter is NULL, then handles for all the children of Controller are created by this driver. If this parameter is not NULL and the first Device Path Node is not the End of Device Path Node, then only the handle for the child device specified by the first Device Path Node of RemainingDevicePath is created by this driver. If the first Device Path Node of RemainingDevicePath is the End of Device Path Node, no child handle is created by this driver.
Return values
EFI_SUCCESSThe device was started.
EFI_DEVICE_ERRORThe device could not be started due to a device error.Currently not implemented.
EFI_OUT_OF_RESOURCESThe request could not be completed due to a lack of resources.
OthersThe driver failed to start the device.

Definition at line 640 of file DnsDriver.c.

◆ Dns4DriverBindingStop()

EFI_STATUS EFIAPI Dns4DriverBindingStop ( IN EFI_DRIVER_BINDING_PROTOCOL This,
IN EFI_HANDLE  ControllerHandle,
IN UINTN  NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer  OPTIONAL 
)

Stops a device controller or a bus controller.

The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). As a result, much of the error checking on the parameters to Stop() has been moved into this common boot service. It is legal to call Stop() from other locations, but the following calling restrictions must be followed, or the system behavior will not be deterministic.

  1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this same driver's Start() function.
  2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid EFI_HANDLE. In addition, all of these handles must have been created in this driver's Start() function, and the Start() function must have called OpenProtocol() on ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
Parameters
[in]ThisA pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]ControllerHandleA handle to the device being stopped. The handle must support a bus specific I/O protocol for the driver to use to stop the device.
[in]NumberOfChildrenThe number of child device handles in ChildHandleBuffer.
[in]ChildHandleBufferAn array of child handles to be freed. May be NULL if NumberOfChildren is 0.
Return values
EFI_SUCCESSThe device was stopped.
EFI_DEVICE_ERRORThe device could not be stopped due to a device error.

Definition at line 710 of file DnsDriver.c.

◆ Dns4DriverBindingSupported()

EFI_STATUS EFIAPI Dns4DriverBindingSupported ( IN EFI_DRIVER_BINDING_PROTOCOL This,
IN EFI_HANDLE  ControllerHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath  OPTIONAL 
)

Tests to see if this driver supports a given controller. If a child device is provided, it further tests to see if this driver supports creating a handle for the specified child device.

This function checks to see if the driver specified by This supports the device specified by ControllerHandle. Drivers will typically use the device path attached to ControllerHandle and/or the services from the bus I/O abstraction attached to ControllerHandle to determine if the driver supports ControllerHandle. This function may be called many times during platform initialization. In order to reduce boot times, the tests performed by this function must be very small, and take as little time as possible to execute. This function must not change the state of any hardware devices, and this function must be aware that the device specified by ControllerHandle may already be managed by the same driver or a different driver. This function must match its calls to AllocatePages() with FreePages(), AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). Because ControllerHandle may have been previously started by the same driver, if a protocol is already in the opened state, then it must not be closed with CloseProtocol(). This is required to guarantee the state of ControllerHandle is not modified by this function.

Parameters
[in]ThisA pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]ControllerHandleThe handle of the controller to test. This handle must support a protocol interface that supplies an I/O abstraction to the driver.
[in]RemainingDevicePathA pointer to the remaining portion of a device path. This parameter is ignored by device drivers, and is optional for bus drivers. For bus drivers, if this parameter is not NULL, then the bus driver must determine if the bus controller specified by ControllerHandle and the child controller specified by RemainingDevicePath are both supported by this bus driver.
Return values
EFI_SUCCESSThe device specified by ControllerHandle and RemainingDevicePath is supported by the driver specified by This.
EFI_ALREADY_STARTEDThe device specified by ControllerHandle and RemainingDevicePath is already being managed by the driver specified by This.
EFI_ACCESS_DENIEDThe device specified by ControllerHandle and RemainingDevicePath is already being managed by a different driver or an application that requires exclusive access. Currently not implemented.
EFI_UNSUPPORTEDThe device specified by ControllerHandle and RemainingDevicePath is not supported by the driver specified by This.

Definition at line 565 of file DnsDriver.c.

◆ Dns4ServiceBindingCreateChild()

EFI_STATUS EFIAPI Dns4ServiceBindingCreateChild ( IN EFI_SERVICE_BINDING_PROTOCOL This,
IN EFI_HANDLE ChildHandle 
)

Creates a child handle and installs a protocol.

The CreateChild() function installs a protocol on ChildHandle. If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle. If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.

Parameters
[in]ThisPointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
[in]ChildHandlePointer to the handle of the child to create. If it is NULL, then a new handle is created. If it is a pointer to an existing UEFI handle, then the protocol is added to the existing UEFI handle.
Return values
EFI_SUCCESSThe protocol was added to ChildHandle.
EFI_INVALID_PARAMETERChildHandle is NULL.
EFI_OUT_OF_RESOURCESThere are not enough resources available to create the child
otherThe child handle was not created

Definition at line 1071 of file DnsDriver.c.

◆ Dns4ServiceBindingDestroyChild()

EFI_STATUS EFIAPI Dns4ServiceBindingDestroyChild ( IN EFI_SERVICE_BINDING_PROTOCOL This,
IN EFI_HANDLE  ChildHandle 
)

Destroys a child handle with a protocol installed on it.

The DestroyChild() function does the opposite of CreateChild(). It removes a protocol that was installed by CreateChild() from ChildHandle. If the removed protocol is the last protocol on ChildHandle, then ChildHandle is destroyed.

Parameters
[in]ThisPointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
[in]ChildHandleHandle of the child to destroy
Return values
EFI_SUCCESSThe protocol was removed from ChildHandle.
EFI_UNSUPPORTEDChildHandle does not support the protocol that is being removed.
EFI_INVALID_PARAMETERChild handle is NULL.
EFI_ACCESS_DENIEDThe protocol could not be removed from the ChildHandle because its services are being used.
otherThe child handle was not destroyed

Definition at line 1202 of file DnsDriver.c.

◆ Dns6DriverBindingStart()

EFI_STATUS EFIAPI Dns6DriverBindingStart ( IN EFI_DRIVER_BINDING_PROTOCOL This,
IN EFI_HANDLE  ControllerHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath  OPTIONAL 
)

Starts a device controller or a bus controller.

The Start() function is designed to be invoked from the EFI boot service ConnectController(). As a result, much of the error checking on the parameters to Start() has been moved into this common boot service. It is legal to call Start() from other locations, but the following calling restrictions must be followed, or the system behavior will not be deterministic.

  1. ControllerHandle must be a valid EFI_HANDLE.
  2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned EFI_DEVICE_PATH_PROTOCOL.
  3. Prior to calling Start(), the Supported() function for the driver specified by This must have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
Parameters
[in]ThisA pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]ControllerHandleThe handle of the controller to start. This handle must support a protocol interface that supplies an I/O abstraction to the driver.
[in]RemainingDevicePathA pointer to the remaining portion of a device path. This parameter is ignored by device drivers, and is optional for bus drivers. For a bus driver, if this parameter is NULL, then handles for all the children of Controller are created by this driver. If this parameter is not NULL and the first Device Path Node is not the End of Device Path Node, then only the handle for the child device specified by the first Device Path Node of RemainingDevicePath is created by this driver. If the first Device Path Node of RemainingDevicePath is the End of Device Path Node, no child handle is created by this driver.
Return values
EFI_SUCCESSThe device was started.
EFI_DEVICE_ERRORThe device could not be started due to a device error.Currently not implemented.
EFI_OUT_OF_RESOURCESThe request could not be completed due to a lack of resources.
OthersThe driver failed to start the device.

Definition at line 904 of file DnsDriver.c.

◆ Dns6DriverBindingStop()

EFI_STATUS EFIAPI Dns6DriverBindingStop ( IN EFI_DRIVER_BINDING_PROTOCOL This,
IN EFI_HANDLE  ControllerHandle,
IN UINTN  NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer  OPTIONAL 
)

Stops a device controller or a bus controller.

The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). As a result, much of the error checking on the parameters to Stop() has been moved into this common boot service. It is legal to call Stop() from other locations, but the following calling restrictions must be followed, or the system behavior will not be deterministic.

  1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this same driver's Start() function.
  2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid EFI_HANDLE. In addition, all of these handles must have been created in this driver's Start() function, and the Start() function must have called OpenProtocol() on ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
Parameters
[in]ThisA pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]ControllerHandleA handle to the device being stopped. The handle must support a bus specific I/O protocol for the driver to use to stop the device.
[in]NumberOfChildrenThe number of child device handles in ChildHandleBuffer.
[in]ChildHandleBufferAn array of child handles to be freed. May be NULL if NumberOfChildren is 0.
Return values
EFI_SUCCESSThe device was stopped.
EFI_DEVICE_ERRORThe device could not be stopped due to a device error.

Definition at line 975 of file DnsDriver.c.

◆ Dns6DriverBindingSupported()

EFI_STATUS EFIAPI Dns6DriverBindingSupported ( IN EFI_DRIVER_BINDING_PROTOCOL This,
IN EFI_HANDLE  ControllerHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath  OPTIONAL 
)

Tests to see if this driver supports a given controller. If a child device is provided, it further tests to see if this driver supports creating a handle for the specified child device.

This function checks to see if the driver specified by This supports the device specified by ControllerHandle. Drivers will typically use the device path attached to ControllerHandle and/or the services from the bus I/O abstraction attached to ControllerHandle to determine if the driver supports ControllerHandle. This function may be called many times during platform initialization. In order to reduce boot times, the tests performed by this function must be very small, and take as little time as possible to execute. This function must not change the state of any hardware devices, and this function must be aware that the device specified by ControllerHandle may already be managed by the same driver or a different driver. This function must match its calls to AllocatePages() with FreePages(), AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). Because ControllerHandle may have been previously started by the same driver, if a protocol is already in the opened state, then it must not be closed with CloseProtocol(). This is required to guarantee the state of ControllerHandle is not modified by this function.

Parameters
[in]ThisA pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]ControllerHandleThe handle of the controller to test. This handle must support a protocol interface that supplies an I/O abstraction to the driver.
[in]RemainingDevicePathA pointer to the remaining portion of a device path. This parameter is ignored by device drivers, and is optional for bus drivers. For bus drivers, if this parameter is not NULL, then the bus driver must determine if the bus controller specified by ControllerHandle and the child controller specified by RemainingDevicePath are both supported by this bus driver.
Return values
EFI_SUCCESSThe device specified by ControllerHandle and RemainingDevicePath is supported by the driver specified by This.
EFI_ALREADY_STARTEDThe device specified by ControllerHandle and RemainingDevicePath is already being managed by the driver specified by This.
EFI_ACCESS_DENIEDThe device specified by ControllerHandle and RemainingDevicePath is already being managed by a different driver or an application that requires exclusive access. Currently not implemented.
EFI_UNSUPPORTEDThe device specified by ControllerHandle and RemainingDevicePath is not supported by the driver specified by This.

Definition at line 829 of file DnsDriver.c.

◆ Dns6ServiceBindingCreateChild()

EFI_STATUS EFIAPI Dns6ServiceBindingCreateChild ( IN EFI_SERVICE_BINDING_PROTOCOL This,
IN EFI_HANDLE ChildHandle 
)

Creates a child handle and installs a protocol.

The CreateChild() function installs a protocol on ChildHandle. If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle. If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.

Parameters
[in]ThisPointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
[in]ChildHandlePointer to the handle of the child to create. If it is NULL, then a new handle is created. If it is a pointer to an existing UEFI handle, then the protocol is added to the existing UEFI handle.
Return values
EFI_SUCCESSThe protocol was added to ChildHandle.
EFI_INVALID_PARAMETERChildHandle is NULL.
EFI_OUT_OF_RESOURCESThere are not enough resources available to create the child
otherThe child handle was not created

Definition at line 1315 of file DnsDriver.c.

◆ Dns6ServiceBindingDestroyChild()

EFI_STATUS EFIAPI Dns6ServiceBindingDestroyChild ( IN EFI_SERVICE_BINDING_PROTOCOL This,
IN EFI_HANDLE  ChildHandle 
)

Destroys a child handle with a protocol installed on it.

The DestroyChild() function does the opposite of CreateChild(). It removes a protocol that was installed by CreateChild() from ChildHandle. If the removed protocol is the last protocol on ChildHandle, then ChildHandle is destroyed.

Parameters
[in]ThisPointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
[in]ChildHandleHandle of the child to destroy
Return values
EFI_SUCCESSThe protocol was removed from ChildHandle.
EFI_UNSUPPORTEDChildHandle does not support the protocol that is being removed.
EFI_INVALID_PARAMETERChild handle is NULL.
EFI_ACCESS_DENIEDThe protocol could not be removed from the ChildHandle because its services are being used.
otherThe child handle was not destroyed

Definition at line 1446 of file DnsDriver.c.

◆ DnsConfigNullUdp()

EFI_STATUS EFIAPI DnsConfigNullUdp ( IN UDP_IO UdpIo,
IN VOID *  Context 
)

Config a NULL UDP that is used to keep the connection between UDP and DNS.

Just leave the Udp child unconfigured. When UDP is unloaded, DNS will be informed with DriverBinding Stop.

Parameters
UdpIoThe UDP_IO to configure
ContextThe opaque parameter to the callback
Return values
EFI_SUCCESSIt always return EFI_SUCCESS directly.

Definition at line 179 of file DnsDriver.c.

◆ DnsCreateInstance()

EFI_STATUS DnsCreateInstance ( IN DNS_SERVICE Service,
OUT DNS_INSTANCE **  Instance 
)

Create the DNS instance and initialize it.

Parameters
[in]ServiceThe pointer to the DNS service.
[out]InstanceThe pointer to the DNS instance.
Return values
EFI_OUT_OF_RESOURCESFailed to allocate resources.
EFI_SUCCESSThe DNS instance is created.

NicHandle

Definition at line 82 of file DnsDriver.c.

◆ DnsCreateService()

EFI_STATUS DnsCreateService ( IN EFI_HANDLE  Controller,
IN EFI_HANDLE  Image,
IN UINT8  IpVersion,
OUT DNS_SERVICE **  Service 
)

Create then initialize a Dns service binding instance.

Parameters
ControllerThe controller to install the DNS service binding on
ImageThe driver binding image of the DNS driver
IpVersionIpVersion for this service
ServiceThe variable to receive the created service binding instance.
Return values
EFI_OUT_OF_RESOURCESFailed to allocate resource to create the instance.
EFI_DEVICE_ERRORFailed to create a NULL UDP port to keep connection with UDP.
EFI_SUCCESSThe service instance is created for the controller.

Definition at line 229 of file DnsDriver.c.

◆ DnsDestroyChildEntryInHandleBuffer()

EFI_STATUS EFIAPI DnsDestroyChildEntryInHandleBuffer ( IN LIST_ENTRY Entry,
IN VOID *  Context 
)

Callback function which provided by user to remove one node in NetDestroyLinkList process.

Parameters
[in]EntryThe entry to be removed.
[in]ContextPointer to the callback context corresponds to the Context in NetDestroyLinkList.
Return values
EFI_SUCCESSThe entry has been removed successfully.
OthersFail to remove the entry.

Definition at line 139 of file DnsDriver.c.

◆ DnsDestroyInstance()

VOID DnsDestroyInstance ( IN DNS_INSTANCE Instance)

Destroy the DNS instance and recycle the resources.

Parameters
[in]InstanceThe pointer to the DNS instance.

Definition at line 48 of file DnsDriver.c.

◆ DnsDestroyService()

VOID DnsDestroyService ( IN DNS_SERVICE DnsSb)

Release all the resource used the DNS service binding instance.

Parameters
DnsSbThe Dns service binding instance.

Definition at line 194 of file DnsDriver.c.

◆ DnsDriverEntryPoint()

EFI_STATUS EFIAPI DnsDriverEntryPoint ( IN EFI_HANDLE  ImageHandle,
IN EFI_SYSTEM_TABLE SystemTable 
)

This is the declaration of an EFI image entry point. This entry point is the same for UEFI Applications, UEFI OS Loaders, and UEFI Drivers including both device drivers and bus drivers.

Parameters
ImageHandleThe firmware allocated handle for the UEFI image.
SystemTableA pointer to the EFI System Table.
Return values
EFI_SUCCESSThe operation completed successfully.
OthersAn unexpected error occurred.

Definition at line 424 of file DnsDriver.c.

◆ DnsUnload()

EFI_STATUS EFIAPI DnsUnload ( IN EFI_HANDLE  ImageHandle)

Unloads an image.

Parameters
ImageHandleHandle that identifies the image to be unloaded.
Return values
EFI_SUCCESSThe image has been unloaded.
EFI_INVALID_PARAMETERImageHandle is not a valid image handle.

Definition at line 340 of file DnsDriver.c.

Variable Documentation

◆ mDriverData

DNS_DRIVER_DATA* mDriverData
extern

Definition at line 39 of file DnsDriver.c.