UsbHcMem.c

Go to the documentation of this file.

 
#include "EhcPeim.h"
 
USBHC_MEM_BLOCK *
UsbHcAllocMemBlock (
  IN PEI_USB2_HC_DEV  *Ehc,
  IN  USBHC_MEM_POOL  *Pool,
  IN  UINTN           Pages
  )
{
  USBHC_MEM_BLOCK       *Block;
  VOID                  *BufHost;
  VOID                  *Mapping;
  EFI_PHYSICAL_ADDRESS  MappedAddr;
  EFI_STATUS            Status;
  UINTN                 PageNumber;
  EFI_PHYSICAL_ADDRESS  TempPtr;
 
  Mapping    = NULL;
  PageNumber =  sizeof (USBHC_MEM_BLOCK)/PAGESIZE +1;
  Status     = PeiServicesAllocatePages (
                 EfiBootServicesCode,
                 PageNumber,
                 &TempPtr
                 );
 
  if (EFI_ERROR (Status)) {
    return NULL;
  }
 
  ZeroMem ((VOID   *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
 
  //
  // each bit in the bit array represents USBHC_MEM_UNIT
  // bytes of memory in the memory block.
  //
  ASSERT (USBHC_MEM_UNIT * 8 <= EFI_PAGE_SIZE);
 
  Block          = (USBHC_MEM_BLOCK *)(UINTN)TempPtr;
  Block->BufLen  = EFI_PAGES_TO_SIZE (Pages);
  Block->BitsLen = Block->BufLen / (USBHC_MEM_UNIT * 8);
 
  PageNumber =  (Block->BitsLen)/PAGESIZE +1;
  Status     = PeiServicesAllocatePages (
                 EfiBootServicesCode,
                 PageNumber,
                 &TempPtr
                 );
 
  if (EFI_ERROR (Status)) {
    return NULL;
  }
 
  ZeroMem ((VOID   *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
 
  Block->Bits = (UINT8 *)(UINTN)TempPtr;
 
  Status = IoMmuAllocateBuffer (
             Ehc->IoMmu,
             Pages,
             (VOID **)&BufHost,
             &MappedAddr,
             &Mapping
             );
  if (EFI_ERROR (Status)) {
    return NULL;
  }
 
  ZeroMem (BufHost, Pages*EFI_PAGE_SIZE);
 
  //
  // Check whether the data structure used by the host controller
  // should be restricted into the same 4G
  //
  if (Pool->Check4G && (Pool->Which4G != USB_HC_HIGH_32BIT (MappedAddr))) {
    return NULL;
  }
 
  Block->BufHost = BufHost;
  Block->Buf     = (UINT8 *)((UINTN)MappedAddr);
  Block->Mapping = Mapping;
  Block->Next    = NULL;
 
  return Block;
}
 
VOID
UsbHcFreeMemBlock (
  IN PEI_USB2_HC_DEV  *Ehc,
  IN USBHC_MEM_POOL   *Pool,
  IN USBHC_MEM_BLOCK  *Block
  )
{
  ASSERT ((Pool != NULL) && (Block != NULL));
 
  IoMmuFreeBuffer (Ehc->IoMmu, EFI_SIZE_TO_PAGES (Block->BufLen), Block->BufHost, Block->Mapping);
}
 
VOID *
UsbHcAllocMemFromBlock (
  IN  USBHC_MEM_BLOCK  *Block,
  IN  UINTN            Units
  )
{
  UINTN  Byte;
  UINT8  Bit;
  UINTN  StartByte;
  UINT8  StartBit;
  UINTN  Available;
  UINTN  Count;
 
  ASSERT ((Block != 0) && (Units != 0));
 
  StartByte = 0;
  StartBit  = 0;
  Available = 0;
 
  for (Byte = 0, Bit = 0; Byte < Block->BitsLen;) {
    //
    // If current bit is zero, the corresponding memory unit is
    // available, otherwise we need to restart our searching.
    // Available counts the consective number of zero bit.
    //
    if (!USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit)) {
      Available++;
 
      if (Available >= Units) {
        break;
      }
 
      NEXT_BIT (Byte, Bit);
    } else {
      NEXT_BIT (Byte, Bit);
 
      Available = 0;
      StartByte = Byte;
      StartBit  = Bit;
    }
  }
 
  if (Available < Units) {
    return NULL;
  }
 
  //
  // Mark the memory as allocated
  //
  Byte = StartByte;
  Bit  = StartBit;
 
  for (Count = 0; Count < Units; Count++) {
    ASSERT (!USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));
 
    Block->Bits[Byte] = (UINT8)(Block->Bits[Byte] | (UINT8)USB_HC_BIT (Bit));
    NEXT_BIT (Byte, Bit);
  }
 
  return Block->Buf + (StartByte * 8 + StartBit) * USBHC_MEM_UNIT;
}
 
EFI_PHYSICAL_ADDRESS
UsbHcGetPciAddressForHostMem (
  IN USBHC_MEM_POOL  *Pool,
  IN VOID            *Mem,
  IN UINTN           Size
  )
{
  USBHC_MEM_BLOCK       *Head;
  USBHC_MEM_BLOCK       *Block;
  UINTN                 AllocSize;
  EFI_PHYSICAL_ADDRESS  PhyAddr;
  UINTN                 Offset;
 
  Head      = Pool->Head;
  AllocSize = USBHC_MEM_ROUND (Size);
 
  if (Mem == NULL) {
    return 0;
  }
 
  for (Block = Head; Block != NULL; Block = Block->Next) {
    //
    // scan the memory block list for the memory block that
    // completely contains the allocated memory.
    //
    if ((Block->BufHost <= (UINT8 *)Mem) && (((UINT8 *)Mem + AllocSize) <= (Block->BufHost + Block->BufLen))) {
      break;
    }
  }
 
  ASSERT ((Block != NULL));
  //
  // calculate the pci memory address for host memory address.
  //
  Offset  = (UINT8 *)Mem - Block->BufHost;
  PhyAddr = (EFI_PHYSICAL_ADDRESS)(UINTN)(Block->Buf + Offset);
  return PhyAddr;
}
 
VOID
UsbHcInsertMemBlockToPool (
  IN USBHC_MEM_BLOCK  *Head,
  IN USBHC_MEM_BLOCK  *Block
  )
{
  ASSERT ((Head != NULL) && (Block != NULL));
  Block->Next = Head->Next;
  Head->Next  = Block;
}
 
BOOLEAN
UsbHcIsMemBlockEmpty (
  IN USBHC_MEM_BLOCK  *Block
  )
{
  UINTN  Index;
 
  for (Index = 0; Index < Block->BitsLen; Index++) {
    if (Block->Bits[Index] != 0) {
      return FALSE;
    }
  }
 
  return TRUE;
}
 
USBHC_MEM_POOL *
UsbHcInitMemPool (
  IN PEI_USB2_HC_DEV  *Ehc,
  IN BOOLEAN          Check4G,
  IN UINT32           Which4G
  )
{
  USBHC_MEM_POOL        *Pool;
  UINTN                 PageNumber;
  EFI_STATUS            Status;
  EFI_PHYSICAL_ADDRESS  TempPtr;
 
  PageNumber =  sizeof (USBHC_MEM_POOL)/PAGESIZE +1;
  Status     = PeiServicesAllocatePages (
                 EfiBootServicesCode,
                 PageNumber,
                 &TempPtr
                 );
 
  if (EFI_ERROR (Status)) {
    return NULL;
  }
 
  ZeroMem ((VOID   *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
 
  Pool = (USBHC_MEM_POOL *)((UINTN)TempPtr);
 
  Pool->Check4G = Check4G;
  Pool->Which4G = Which4G;
  Pool->Head    = UsbHcAllocMemBlock (Ehc, Pool, USBHC_MEM_DEFAULT_PAGES);
 
  if (Pool->Head == NULL) {
    Pool = NULL;
  }
 
  return Pool;
}
 
EFI_STATUS
UsbHcFreeMemPool (
  IN PEI_USB2_HC_DEV  *Ehc,
  IN USBHC_MEM_POOL   *Pool
  )
{
  USBHC_MEM_BLOCK  *Block;
 
  ASSERT (Pool->Head != NULL);
 
  //
  // Unlink all the memory blocks from the pool, then free them.
  //
  for (Block = Pool->Head->Next; Block != NULL; Block = Block->Next) {
    UsbHcFreeMemBlock (Ehc, Pool, Block);
  }
 
  UsbHcFreeMemBlock (Ehc, Pool, Pool->Head);
 
  return EFI_SUCCESS;
}
 
VOID *
UsbHcAllocateMem (
  IN PEI_USB2_HC_DEV  *Ehc,
  IN  USBHC_MEM_POOL  *Pool,
  IN  UINTN           Size
  )
{
  USBHC_MEM_BLOCK  *Head;
  USBHC_MEM_BLOCK  *Block;
  USBHC_MEM_BLOCK  *NewBlock;
  VOID             *Mem;
  UINTN            AllocSize;
  UINTN            Pages;
 
  Mem       = NULL;
  AllocSize = USBHC_MEM_ROUND (Size);
  Head      = Pool->Head;
  ASSERT (Head != NULL);
 
  //
  // First check whether current memory blocks can satisfy the allocation.
  //
  for (Block = Head; Block != NULL; Block = Block->Next) {
    Mem = UsbHcAllocMemFromBlock (Block, AllocSize / USBHC_MEM_UNIT);
 
    if (Mem != NULL) {
      ZeroMem (Mem, Size);
      break;
    }
  }
 
  if (Mem != NULL) {
    return Mem;
  }
 
  //
  // Create a new memory block if there is not enough memory
  // in the pool. If the allocation size is larger than the
  // default page number, just allocate a large enough memory
  // block. Otherwise allocate default pages.
  //
  if (AllocSize > EFI_PAGES_TO_SIZE (USBHC_MEM_DEFAULT_PAGES)) {
    Pages = EFI_SIZE_TO_PAGES (AllocSize) + 1;
  } else {
    Pages = USBHC_MEM_DEFAULT_PAGES;
  }
 
  NewBlock = UsbHcAllocMemBlock (Ehc, Pool, Pages);
 
  if (NewBlock == NULL) {
    return NULL;
  }
 
  //
  // Add the new memory block to the pool, then allocate memory from it
  //
  UsbHcInsertMemBlockToPool (Head, NewBlock);
  Mem = UsbHcAllocMemFromBlock (NewBlock, AllocSize / USBHC_MEM_UNIT);
 
  if (Mem != NULL) {
    ZeroMem (Mem, Size);
  }
 
  return Mem;
}
 
VOID
UsbHcFreeMem (
  IN PEI_USB2_HC_DEV  *Ehc,
  IN USBHC_MEM_POOL   *Pool,
  IN VOID             *Mem,
  IN UINTN            Size
  )
{
  USBHC_MEM_BLOCK  *Head;
  USBHC_MEM_BLOCK  *Block;
  UINT8            *ToFree;
  UINTN            AllocSize;
  UINTN            Byte;
  UINTN            Bit;
  UINTN            Count;
 
  Head      = Pool->Head;
  AllocSize = USBHC_MEM_ROUND (Size);
  ToFree    = (UINT8 *)Mem;
 
  for (Block = Head; Block != NULL; Block = Block->Next) {
    //
    // scan the memory block list for the memory block that
    // completely contains the memory to free.
    //
    if ((Block->Buf <= ToFree) && ((ToFree + AllocSize) <= (Block->Buf + Block->BufLen))) {
      //
      // compute the start byte and bit in the bit array
      //
      Byte = ((ToFree - Block->Buf) / USBHC_MEM_UNIT) / 8;
      Bit  = ((ToFree - Block->Buf) / USBHC_MEM_UNIT) % 8;
 
      //
      // reset associated bits in bit array
      //
      for (Count = 0; Count < (AllocSize / USBHC_MEM_UNIT); Count++) {
        ASSERT (USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));
 
        Block->Bits[Byte] = (UINT8)(Block->Bits[Byte] ^ USB_HC_BIT (Bit));
        NEXT_BIT (Byte, Bit);
      }
 
      break;
    }
  }
 
  //
  // If Block == NULL, it means that the current memory isn't
  // in the host controller's pool. This is critical because
  // the caller has passed in a wrong memory point
  //
  ASSERT (Block != NULL);
 
  //
  // Release the current memory block if it is empty and not the head
  //
  if ((Block != Head) && UsbHcIsMemBlockEmpty (Block)) {
    UsbHcFreeMemBlock (Ehc, Pool, Block);
  }
 
  return;
}