DriverBinding.h File Reference

Go to the source code of this file.

Data Structures
struct	_EFI_DRIVER_BINDING_PROTOCOL

Macros
#define	EFI_DRIVER_BINDING_PROTOCOL_GUID

Typedefs
typedef struct _EFI_DRIVER_BINDING_PROTOCOL	EFI_DRIVER_BINDING_PROTOCOL
typedef EFI_STATUS(EFIAPI *	EFI_DRIVER_BINDING_SUPPORTED) (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL)
typedef EFI_STATUS(EFIAPI *	EFI_DRIVER_BINDING_START) (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL)
typedef EFI_STATUS(EFIAPI *	EFI_DRIVER_BINDING_STOP) (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN UINTN NumberOfChildren, IN EFI_HANDLE *ChildHandleBuffer OPTIONAL)

Variables
EFI_GUID	gEfiDriverBindingProtocolGuid

Detailed Description

UEFI DriverBinding Protocol is defined in UEFI specification.

This protocol is produced by every driver that follows the UEFI Driver Model, and it is the central component that allows drivers and controllers to be managed.

Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent

Definition in file DriverBinding.h.

Macro Definition Documentation

EFI_DRIVER_BINDING_PROTOCOL_GUID

#define EFI_DRIVER_BINDING_PROTOCOL_GUID

Value:

  { \
    0x18a031ab, 0xb443, 0x4d1a, {0xa5, 0xc0, 0xc, 0x9, 0x26, 0x1e, 0x9f, 0x71 } \
  }

The global ID for the ControllerHandle Driver Protocol.

Definition at line 18 of file DriverBinding.h.

Typedef Documentation

EFI_DRIVER_BINDING_PROTOCOL

typedef struct _EFI_DRIVER_BINDING_PROTOCOL EFI_DRIVER_BINDING_PROTOCOL

Definition at line 23 of file DriverBinding.h.

EFI_DRIVER_BINDING_START

typedef EFI_STATUS(EFIAPI * EFI_DRIVER_BINDING_START) (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL)

Starts a device controller or a bus controller.

The Start() function is designed to be invoked from the EFI boot service ConnectController(). As a result, much of the error checking on the parameters to Start() has been moved into this common boot service. It is legal to call Start() from other locations, but the following calling restrictions must be followed, or the system behavior will not be deterministic.

1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver specified by This must have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.

Parameters

[in]	This	A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]	ControllerHandle	The handle of the controller to start. This handle must support a protocol interface that supplies an I/O abstraction to the driver.
[in]	RemainingDevicePath	A pointer to the remaining portion of a device path. This parameter is ignored by device drivers, and is optional for bus drivers. For a bus driver, if this parameter is NULL, then handles for all the children of Controller are created by this driver. If this parameter is not NULL and the first Device Path Node is not the End of Device Path Node, then only the handle for the child device specified by the first Device Path Node of RemainingDevicePath is created by this driver. If the first Device Path Node of RemainingDevicePath is the End of Device Path Node, no child handle is created by this driver.

Return values

EFI_SUCCESS	The device was started.
EFI_DEVICE_ERROR	The device could not be started due to a device error.Currently not implemented.
EFI_OUT_OF_RESOURCES	The request could not be completed due to a lack of resources.
Others	The driver failded to start the device.

Definition at line 111 of file DriverBinding.h.

EFI_DRIVER_BINDING_STOP

typedef EFI_STATUS(EFIAPI * EFI_DRIVER_BINDING_STOP) (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN UINTN NumberOfChildren, IN EFI_HANDLE *ChildHandleBuffer OPTIONAL)

Stops a device controller or a bus controller.

The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). As a result, much of the error checking on the parameters to Stop() has been moved into this common boot service. It is legal to call Stop() from other locations, but the following calling restrictions must be followed, or the system behavior will not be deterministic.

1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this same driver's Start() function.
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid EFI_HANDLE. In addition, all of these handles must have been created in this driver's Start() function, and the Start() function must have called OpenProtocol() on ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.

Parameters

[in]	This	A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]	ControllerHandle	A handle to the device being stopped. The handle must support a bus specific I/O protocol for the driver to use to stop the device.
[in]	NumberOfChildren	The number of child device handles in ChildHandleBuffer.
[in]	ChildHandleBuffer	An array of child handles to be freed. May be NULL if NumberOfChildren is 0.

Return values

EFI_SUCCESS	The device was stopped.
EFI_DEVICE_ERROR	The device could not be stopped due to a device error.

Definition at line 145 of file DriverBinding.h.

EFI_DRIVER_BINDING_SUPPORTED

typedef EFI_STATUS(EFIAPI * EFI_DRIVER_BINDING_SUPPORTED) (IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL)

Tests to see if this driver supports a given controller. If a child device is provided, it further tests to see if this driver supports creating a handle for the specified child device.

This function checks to see if the driver specified by This supports the device specified by ControllerHandle. Drivers will typically use the device path attached to ControllerHandle and/or the services from the bus I/O abstraction attached to ControllerHandle to determine if the driver supports ControllerHandle. This function may be called many times during platform initialization. In order to reduce boot times, the tests performed by this function must be very small, and take as little time as possible to execute. This function must not change the state of any hardware devices, and this function must be aware that the device specified by ControllerHandle may already be managed by the same driver or a different driver. This function must match its calls to AllocatePages() with FreePages(), AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). Because ControllerHandle may have been previously started by the same driver, if a protocol is already in the opened state, then it must not be closed with CloseProtocol(). This is required to guarantee the state of ControllerHandle is not modified by this function.

Parameters

[in]	This	A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
[in]	ControllerHandle	The handle of the controller to test. This handle must support a protocol interface that supplies an I/O abstraction to the driver.
[in]	RemainingDevicePath	A pointer to the remaining portion of a device path. This parameter is ignored by device drivers, and is optional for bus drivers. For bus drivers, if this parameter is not NULL, then the bus driver must determine if the bus controller specified by ControllerHandle and the child controller specified by RemainingDevicePath are both supported by this bus driver.

Return values

EFI_SUCCESS	The device specified by ControllerHandle and RemainingDevicePath is supported by the driver specified by This.
EFI_ALREADY_STARTED	The device specified by ControllerHandle and RemainingDevicePath is already being managed by the driver specified by This.
EFI_ACCESS_DENIED	The device specified by ControllerHandle and RemainingDevicePath is already being managed by a different driver or an application that requires exclusive access. Currently not implemented.
EFI_UNSUPPORTED	The device specified by ControllerHandle and RemainingDevicePath is not supported by the driver specified by This.

Definition at line 68 of file DriverBinding.h.