#include "InternalSmbusLib.h"

Functions
VOID EFIAPI	SmBusQuickRead (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

VOID EFIAPI	SmBusQuickWrite (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

UINT8 EFIAPI	SmBusReceiveByte (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

UINT8 EFIAPI	SmBusSendByte (IN UINTN SmBusAddress, IN UINT8 Value, OUT RETURN_STATUS *Status OPTIONAL)

UINT8 EFIAPI	SmBusReadDataByte (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

UINT8 EFIAPI	SmBusWriteDataByte (IN UINTN SmBusAddress, IN UINT8 Value, OUT RETURN_STATUS *Status OPTIONAL)

UINT16 EFIAPI	SmBusReadDataWord (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

UINT16 EFIAPI	SmBusWriteDataWord (IN UINTN SmBusAddress, IN UINT16 Value, OUT RETURN_STATUS *Status OPTIONAL)

UINT16 EFIAPI	SmBusProcessCall (IN UINTN SmBusAddress, IN UINT16 Value, OUT RETURN_STATUS *Status OPTIONAL)

UINTN EFIAPI	SmBusReadBlock (IN UINTN SmBusAddress, OUT VOID Buffer, OUT RETURN_STATUS Status OPTIONAL)

UINTN EFIAPI	SmBusWriteBlock (IN UINTN SmBusAddress, OUT VOID Buffer, OUT RETURN_STATUS Status OPTIONAL)

UINTN EFIAPI	SmBusBlockProcessCall (IN UINTN SmBusAddress, IN VOID WriteBuffer, OUT VOID ReadBuffer, OUT RETURN_STATUS *Status OPTIONAL)

Detailed Description

Implementation of SmBusLib class library for PEI phase.

Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent

Definition in file SmbusLib.c.

Function Documentation

◆ SmBusBlockProcessCall()

UINTN EFIAPI SmBusBlockProcessCall	(	IN UINTN	SmBusAddress,
		IN VOID *	WriteBuffer,
		OUT VOID *	ReadBuffer,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS block process call command.

Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress. The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer. If Status is not NULL, then the status of the executed command is returned in Status. It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read. SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. If Length in SmBusAddress is zero or greater than 32, then ASSERT(). If WriteBuffer is NULL, then ASSERT(). If ReadBuffer is NULL, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
WriteBuffer	The pointer to the buffer of bytes to write to the SMBUS.
ReadBuffer	The pointer to the buffer of bytes to read from the SMBUS.
Status	Return status for the executed command. This is an optional parameter and may be NULL. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The number of bytes written.

Definition at line 557 of file SmbusLib.c.

◆ SmBusProcessCall()

UINT16 EFIAPI SmBusProcessCall	(	IN UINTN	SmBusAddress,
		IN UINT16	Value,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS process call command.

Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress. The 16-bit value specified by Value is written. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. The 16-bit value returned by the process call command is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Value	The 16-bit value to write.
Status	Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The 16-bit value returned by the process call command.

Definition at line 411 of file SmbusLib.c.

◆ SmBusQuickRead()

VOID EFIAPI SmBusQuickRead	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS quick read command.

Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address field of SmBusAddress is required. If Status is not NULL, then the status of the executed command is returned in Status. If PEC is set in SmBusAddress, then ASSERT(). If Command in SmBusAddress is not zero, then ASSERT(). If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.

Status Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_UNSUPPORTED: The SMBus operation is not supported.

Definition at line 40 of file SmbusLib.c.

◆ SmBusQuickWrite()

VOID EFIAPI SmBusQuickWrite	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS quick write command.

Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address field of SmBusAddress is required. If Status is not NULL, then the status of the executed command is returned in Status. If PEC is set in SmBusAddress, then ASSERT(). If Command in SmBusAddress is not zero, then ASSERT(). If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.

Status Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_UNSUPPORTED:: The SMBus operation is not supported.

Definition at line 81 of file SmbusLib.c.

◆ SmBusReadBlock()

UINTN EFIAPI SmBusReadBlock	(	IN UINTN	SmBusAddress,
		OUT VOID *	Buffer,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS read block command.

Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. Bytes are read from the SMBUS and stored in Buffer. The number of bytes read is returned, and will never return a value larger than 32-bytes. If Status is not NULL, then the status of the executed command is returned in Status. It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read. SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. If Length in SmBusAddress is not zero, then ASSERT(). If Buffer is NULL, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Buffer	The pointer to the buffer to store the bytes read from the SMBUS.
Status	Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The number of bytes read.

Definition at line 460 of file SmbusLib.c.

◆ SmBusReadDataByte()

UINT8 EFIAPI SmBusReadDataByte	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS read data byte command.

Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. The 8-bit value read from the SMBUS is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.

Status Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The byte read from the SMBUS.

Definition at line 221 of file SmbusLib.c.

◆ SmBusReadDataWord()

UINT16 EFIAPI SmBusReadDataWord	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS read data word command.

Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. The 16-bit value read from the SMBUS is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.

Status Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The byte read from the SMBUS.

Definition at line 315 of file SmbusLib.c.

◆ SmBusReceiveByte()

UINT8 EFIAPI SmBusReceiveByte	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS receive byte command.

Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address field of SmBusAddress is required. The byte received from the SMBUS is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Command in SmBusAddress is not zero, then ASSERT(). If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.

Status Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The byte received from the SMBUS.

Definition at line 125 of file SmbusLib.c.

◆ SmBusSendByte()

UINT8 EFIAPI SmBusSendByte	(	IN UINTN	SmBusAddress,
		IN UINT8	Value,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS send byte command.

Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress. The byte specified by Value is sent. Only the SMBUS slave address field of SmBusAddress is required. Value is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Command in SmBusAddress is not zero, then ASSERT(). If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Value	The 8-bit value to send.
Status	Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The parameter of Value.

Definition at line 173 of file SmbusLib.c.

◆ SmBusWriteBlock()

UINTN EFIAPI SmBusWriteBlock	(	IN UINTN	SmBusAddress,
		OUT VOID *	Buffer,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS write block command.

Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress. The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. Bytes are written to the SMBUS from Buffer. The number of bytes written is returned, and will never return a value larger than 32-bytes. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is zero or greater than 32, then ASSERT(). If Buffer is NULL, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	The address that encodes the SMBUS Slave Address, MBUS Command, SMBUS Data Length, and PEC.
Buffer	The pointer to the buffer to store the bytes read from the SMBUS.
Status	Return status for the executed command. This is an optional parameter and may be NULL. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct (PEC is incorrect) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The number of bytes written.

Definition at line 505 of file SmbusLib.c.

◆ SmBusWriteDataByte()

UINT8 EFIAPI SmBusWriteDataByte	(	IN UINTN	SmBusAddress,
		IN UINT8	Value,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS write data byte command.

Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress. The 8-bit value specified by Value is written. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. Value is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Value	The 8-bit value to write.
Status	Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The parameter of Value.

Definition at line 268 of file SmbusLib.c.

◆ SmBusWriteDataWord()

UINT16 EFIAPI SmBusWriteDataWord	(	IN UINTN	SmBusAddress,
		IN UINT16	Value,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS write data word command.

Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress. The 16-bit value specified by Value is written. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. Value is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	The address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Value	The 16-bit value to write.
Status	Return status for the executed command. This is an optional parameter and may be NULL. RETURN_SUCCESS: The SMBUS command was executed. RETURN_TIMEOUT: A timeout occurred while executing the SMBUS command. RETURN_DEVICE_ERROR: The request was not completed because a failure reflected in the Host Status Register bit. Device errors are a result of a transaction collision, illegal command field, unclaimed cycle (host initiated), or bus errors (collisions). RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.) RETURN_UNSUPPORTED: The SMBus operation is not supported.

Returns: The parameter of Value.

Definition at line 362 of file SmbusLib.c.

Functions

Detailed Description

Function Documentation

◆ SmBusBlockProcessCall()

◆ SmBusProcessCall()

◆ SmBusQuickRead()

◆ SmBusQuickWrite()

◆ SmBusReadBlock()

◆ SmBusReadDataByte()

◆ SmBusReadDataWord()

◆ SmBusReceiveByte()

◆ SmBusSendByte()

◆ SmBusWriteBlock()

◆ SmBusWriteDataByte()

◆ SmBusWriteDataWord()