Data Structures
struct	_EFI_SECURITY2_ARCH_PROTOCOL

Macros
#define	EFI_SECURITY2_ARCH_PROTOCOL_GUID { 0x94ab2f58, 0x1438, 0x4ef1, {0x91, 0x52, 0x18, 0x94, 0x1a, 0x3a, 0x0e, 0x68 } }

Typedefs
typedef struct _EFI_SECURITY2_ARCH_PROTOCOL	EFI_SECURITY2_ARCH_PROTOCOL

typedef EFI_STATUS(EFIAPI *	EFI_SECURITY2_FILE_AUTHENTICATION) (IN CONST EFI_SECURITY2_ARCH_PROTOCOL This, IN CONST EFI_DEVICE_PATH_PROTOCOL File OPTIONAL, IN VOID *FileBuffer, IN UINTN FileSize, IN BOOLEAN BootPolicy)

Variables
EFI_GUID	gEfiSecurity2ArchProtocolGuid

Detailed Description

Security2 Architectural Protocol as defined in PI Specification1.2.1 VOLUME 2 DXE

Abstracts security-specific functions from the DXE Foundation of UEFI Image Verification, Trusted Computing Group (TCG) measured boot, and User Identity policy for image loading and consoles. This protocol must be produced by a boot service or runtime DXE driver.

This protocol is optional and must be published prior to the EFI_SECURITY_ARCH_PROTOCOL. As a result, the same driver must publish both of these interfaces.

When both Security and Security2 Architectural Protocols are published, LoadImage must use them in accordance with the following rules: The Security2 protocol must be used on every image being loaded. The Security protocol must be used after the Securiy2 protocol and only on images that have been read using Firmware Volume protocol.

When only Security architectural protocol is published, LoadImage must use it on every image being loaded.

Copyright (c) 2012 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent

Definition in file Security2.h.

Macro Definition Documentation

◆ EFI_SECURITY2_ARCH_PROTOCOL_GUID

#define EFI_SECURITY2_ARCH_PROTOCOL_GUID { 0x94ab2f58, 0x1438, 0x4ef1, {0x91, 0x52, 0x18, 0x94, 0x1a, 0x3a, 0x0e, 0x68 } }

Global ID for the Security2 Code Architectural Protocol

Definition at line 31 of file Security2.h.

Typedef Documentation

◆ EFI_SECURITY2_ARCH_PROTOCOL

typedef struct _EFI_SECURITY2_ARCH_PROTOCOL EFI_SECURITY2_ARCH_PROTOCOL

Definition at line 34 of file Security2.h.

◆ EFI_SECURITY2_FILE_AUTHENTICATION

typedef EFI_STATUS(EFIAPI * EFI_SECURITY2_FILE_AUTHENTICATION) (IN CONST EFI_SECURITY2_ARCH_PROTOCOL *This, IN CONST EFI_DEVICE_PATH_PROTOCOL *File OPTIONAL, IN VOID *FileBuffer, IN UINTN FileSize, IN BOOLEAN BootPolicy)

The DXE Foundation uses this service to measure and/or verify a UEFI image.

This service abstracts the invocation of Trusted Computing Group (TCG) measured boot, UEFI Secure boot, and UEFI User Identity infrastructure. For the former two, the DXE Foundation invokes the FileAuthentication() with a DevicePath and corresponding image in FileBuffer memory. The TCG measurement code will record the FileBuffer contents into the appropriate PCR. The image verification logic will confirm the integrity and provenance of the image in FileBuffer of length FileSize . The origin of the image will be DevicePath in these cases. If the FileBuffer is NULL, the interface will determine if the DevicePath can be connected in order to support the User Identification policy.

Parameters

This	The EFI_SECURITY2_ARCH_PROTOCOL instance.
File	A pointer to the device path of the file that is being dispatched. This will optionally be used for logging.
FileBuffer	A pointer to the buffer with the UEFI file image.
FileSize	The size of the file.
BootPolicy	A boot policy that was used to call LoadImage() UEFI service. If FileAuthentication() is invoked not from the LoadImage(), BootPolicy must be set to FALSE.

Return values

EFI_SUCCESS	The file specified by DevicePath and non-NULL FileBuffer did authenticate, and the platform policy dictates that the DXE Foundation may use the file.
EFI_SUCCESS	The device path specified by NULL device path DevicePath and non-NULL FileBuffer did authenticate, and the platform policy dictates that the DXE Foundation may execute the image in FileBuffer.
EFI_SUCCESS	FileBuffer is NULL and current user has permission to start UEFI device drivers on the device path specified by DevicePath.
EFI_SECURITY_VIOLATION	The file specified by DevicePath and FileBuffer did not authenticate, and the platform policy dictates that the file should be placed in the untrusted state. The image has been added to the file execution table.
EFI_ACCESS_DENIED	The file specified by File and FileBuffer did not authenticate, and the platform policy dictates that the DXE Foundation may not use File.
EFI_SECURITY_VIOLATION	FileBuffer is NULL and the user has no permission to start UEFI device drivers on the device path specified by DevicePath.
EFI_SECURITY_VIOLATION	FileBuffer is not NULL and the user has no permission to load drivers from the device path specified by DevicePath. The image has been added into the list of the deferred images.

Definition at line 81 of file Security2.h.

Data Structures

Macros