#include <Base.h>
#include <Library/DebugLib.h>
#include <Library/S3BootScriptLib.h>
#include <Library/SmbusLib.h>
#include <Library/S3SmbusLib.h>

Functions
VOID	InternalSaveSmBusExecToBootScript (IN EFI_SMBUS_OPERATION SmbusOperation, IN UINTN SmBusAddress, IN UINTN Length, IN OUT VOID *Buffer)

VOID EFIAPI	S3SmBusQuickRead (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

VOID EFIAPI	S3SmBusQuickWrite (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

UINT8 EFIAPI	S3SmBusReceiveByte (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

UINT8 EFIAPI	S3SmBusSendByte (IN UINTN SmBusAddress, IN UINT8 Value, OUT RETURN_STATUS *Status OPTIONAL)

UINT8 EFIAPI	S3SmBusReadDataByte (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

UINT8 EFIAPI	S3SmBusWriteDataByte (IN UINTN SmBusAddress, IN UINT8 Value, OUT RETURN_STATUS *Status OPTIONAL)

UINT16 EFIAPI	S3SmBusReadDataWord (IN UINTN SmBusAddress, OUT RETURN_STATUS *Status OPTIONAL)

UINT16 EFIAPI	S3SmBusWriteDataWord (IN UINTN SmBusAddress, IN UINT16 Value, OUT RETURN_STATUS *Status OPTIONAL)

UINT16 EFIAPI	S3SmBusProcessCall (IN UINTN SmBusAddress, IN UINT16 Value, OUT RETURN_STATUS *Status OPTIONAL)

UINTN EFIAPI	S3SmBusReadBlock (IN UINTN SmBusAddress, OUT VOID Buffer, OUT RETURN_STATUS Status OPTIONAL)

UINTN EFIAPI	S3SmBusWriteBlock (IN UINTN SmBusAddress, OUT VOID Buffer, OUT RETURN_STATUS Status OPTIONAL)

UINTN EFIAPI	S3SmBusBlockProcessCall (IN UINTN SmBusAddress, IN VOID WriteBuffer, OUT VOID ReadBuffer, OUT RETURN_STATUS *Status OPTIONAL)

Detailed Description

Smbus Library Services that do SMBus transactions and also enable the operatation to be replayed during an S3 resume. This library class maps directly on top of the SmbusLib class.

SPDX-License-Identifier: BSD-2-Clause-Patent

Definition in file S3SmbusLib.c.

Function Documentation

◆ InternalSaveSmBusExecToBootScript()

VOID InternalSaveSmBusExecToBootScript	(	IN EFI_SMBUS_OPERATION	SmbusOperation,
		IN UINTN	SmBusAddress,
		IN UINTN	Length,
		IN OUT VOID *	Buffer
	)

Saves an SMBus operation to S3 script to be replayed on S3 resume.

This function provides a standard way to save SMBus operation to S3 boot Script. The data can either be of the Length byte, word, or a block of data. If it falis to save S3 boot script, then ASSERT ().

Parameters

SmbusOperation	Signifies which particular SMBus hardware protocol instance that it will use to execute the SMBus transactions.
SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Length	Signifies the number of bytes that this operation will do. The maximum number of bytes can be revision specific and operation specific.
Buffer	Contains the value of data to execute to the SMBus slave device. Not all operations require this argument. The length of this buffer is identified by Length.

Definition at line 37 of file S3SmbusLib.c.

◆ S3SmBusBlockProcessCall()

UINTN EFIAPI S3SmBusBlockProcessCall	(	IN UINTN	SmBusAddress,
		IN VOID *	WriteBuffer,
		OUT VOID *	ReadBuffer,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS block process call command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress. The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer. If Status is not NULL, then the status of the executed command is returned in Status. It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read. SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. If Length in SmBusAddress is zero or greater than 32, then ASSERT(). If WriteBuffer is NULL, then ASSERT(). If ReadBuffer is NULL, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
WriteBuffer	Pointer to the buffer of bytes to write to the SMBUS.
ReadBuffer	Pointer to the buffer of bytes to read from the SMBUS.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The number of bytes written.

Definition at line 480 of file S3SmbusLib.c.

◆ S3SmBusProcessCall()

UINT16 EFIAPI S3SmBusProcessCall	(	IN UINTN	SmBusAddress,
		IN UINT16	Value,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS process call command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress. The 16-bit value specified by Value is written. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. The 16-bit value returned by the process call command is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Value	The 16-bit value to write.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The 16-bit value returned by the process call command.

Definition at line 358 of file S3SmbusLib.c.

◆ S3SmBusQuickRead()

VOID EFIAPI S3SmBusQuickRead	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS quick read command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address field of SmBusAddress is required. If Status is not NULL, then the status of the executed command is returned in Status. If PEC is set in SmBusAddress, then ASSERT(). If Command in SmBusAddress is not zero, then ASSERT(). If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Definition at line 75 of file S3SmbusLib.c.

◆ S3SmBusQuickWrite()

VOID EFIAPI S3SmBusQuickWrite	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS quick write command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address field of SmBusAddress is required. If Status is not NULL, then the status of the executed command is returned in Status. If PEC is set in SmBusAddress, then ASSERT(). If Command in SmBusAddress is not zero, then ASSERT(). If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Definition at line 105 of file S3SmbusLib.c.

◆ S3SmBusReadBlock()

UINTN EFIAPI S3SmBusReadBlock	(	IN UINTN	SmBusAddress,
		OUT VOID *	Buffer,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS read block command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. Bytes are read from the SMBUS and stored in Buffer. The number of bytes read is returned, and will never return a value larger than 32-bytes. If Status is not NULL, then the status of the executed command is returned in Status. It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read. SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. If Length in SmBusAddress is not zero, then ASSERT(). If Buffer is NULL, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Buffer	Pointer to the buffer to store the bytes read from the SMBUS.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The number of bytes read.

Definition at line 399 of file S3SmbusLib.c.

◆ S3SmBusReadDataByte()

UINT8 EFIAPI S3SmBusReadDataByte	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS read data byte command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. The 8-bit value read from the SMBUS is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The byte read from the SMBUS.

Definition at line 210 of file S3SmbusLib.c.

◆ S3SmBusReadDataWord()

UINT16 EFIAPI S3SmBusReadDataWord	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS read data word command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. The 16-bit value read from the SMBUS is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The byte read from the SMBUS.

Definition at line 283 of file S3SmbusLib.c.

◆ S3SmBusReceiveByte()

UINT8 EFIAPI S3SmBusReceiveByte	(	IN UINTN	SmBusAddress,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS receive byte command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress. Only the SMBUS slave address field of SmBusAddress is required. The byte received from the SMBUS is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Command in SmBusAddress is not zero, then ASSERT(). If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The byte received from the SMBUS.

Definition at line 137 of file S3SmbusLib.c.

◆ S3SmBusSendByte()

UINT8 EFIAPI S3SmBusSendByte	(	IN UINTN	SmBusAddress,
		IN UINT8	Value,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS send byte command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress. The byte specified by Value is sent. Only the SMBUS slave address field of SmBusAddress is required. Value is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Command in SmBusAddress is not zero, then ASSERT(). If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Value	The 8-bit value to send.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The parameter of Value.

Definition at line 174 of file S3SmbusLib.c.

◆ S3SmBusWriteBlock()

UINTN EFIAPI S3SmBusWriteBlock	(	IN UINTN	SmBusAddress,
		OUT VOID *	Buffer,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS write block command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress. The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. Bytes are written to the SMBUS from Buffer. The number of bytes written is returned, and will never return a value larger than 32-bytes. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is zero or greater than 32, then ASSERT(). If Buffer is NULL, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Buffer	Pointer to the buffer to store the bytes read from the SMBUS.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The number of bytes written.

Definition at line 438 of file S3SmbusLib.c.

◆ S3SmBusWriteDataByte()

UINT8 EFIAPI S3SmBusWriteDataByte	(	IN UINTN	SmBusAddress,
		IN UINT8	Value,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS write data byte command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress. The 8-bit value specified by Value is written. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. Value is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Value	The 8-bit value to write.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The parameter of Value.

Definition at line 247 of file S3SmbusLib.c.

◆ S3SmBusWriteDataWord()

UINT16 EFIAPI S3SmBusWriteDataWord	(	IN UINTN	SmBusAddress,
		IN UINT16	Value,
		OUT RETURN_STATUS *Status	OPTIONAL
	)

Executes an SMBUS write data word command and saves the value in the S3 script to be replayed on S3 resume.

Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress. The 16-bit value specified by Value is written. Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. Value is returned. If Status is not NULL, then the status of the executed command is returned in Status. If Length in SmBusAddress is not zero, then ASSERT(). If any reserved bits of SmBusAddress are set, then ASSERT().

Parameters

SmBusAddress	Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
Value	The 16-bit value to write.
Status	Return status for the executed command. This is an optional parameter and may be NULL.

Returns: The parameter of Value.

Definition at line 320 of file S3SmbusLib.c.

Functions

Detailed Description

Function Documentation

◆ InternalSaveSmBusExecToBootScript()

◆ S3SmBusBlockProcessCall()

◆ S3SmBusProcessCall()

◆ S3SmBusQuickRead()

◆ S3SmBusQuickWrite()

◆ S3SmBusReadBlock()

◆ S3SmBusReadDataByte()

◆ S3SmBusReadDataWord()

◆ S3SmBusReceiveByte()

◆ S3SmBusSendByte()

◆ S3SmBusWriteBlock()

◆ S3SmBusWriteDataByte()

◆ S3SmBusWriteDataWord()