- Generated on Fri Nov 15 2024 18:01:37 for TianoCore EDK2 by
1.9.6
|
TianoCore EDK2 master
|
#include "BaseLibInternals.h"Go to the source code of this file.
Functions | |
| IA32_REGISTER_SET *EFIAPI | InternalAsmThunk16 (IN IA32_REGISTER_SET *RegisterSet, IN OUT VOID *Transition) |
| VOID EFIAPI | AsmGetThunk16Properties (OUT UINT32 *RealModeBufferSize, OUT UINT32 *ExtraStackSize) |
| VOID EFIAPI | AsmPrepareThunk16 (IN OUT THUNK_CONTEXT *ThunkContext) |
| VOID EFIAPI | AsmThunk16 (IN OUT THUNK_CONTEXT *ThunkContext) |
| VOID EFIAPI | AsmPrepareAndThunk16 (IN OUT THUNK_CONTEXT *ThunkContext) |
Variables | |
| CONST UINT8 | m16Start |
| CONST UINT16 | m16Size |
| CONST UINT16 | mThunk16Attr |
| CONST UINT16 | m16Gdt |
| CONST UINT16 | m16GdtrBase |
| CONST UINT16 | mTransition |
Real Mode Thunk Functions for IA32 and x64.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
Definition in file X86Thunk.c.
| VOID EFIAPI AsmGetThunk16Properties | ( | OUT UINT32 * | RealModeBufferSize, |
| OUT UINT32 * | ExtraStackSize | ||
| ) |
Retrieves the properties for 16-bit thunk functions.
Computes the size of the buffer and stack below 1MB required to use the AsmPrepareThunk16(), AsmThunk16() and AsmPrepareAndThunk16() functions. This buffer size is returned in RealModeBufferSize, and the stack size is returned in ExtraStackSize. If parameters are passed to the 16-bit real mode code, then the actual minimum stack size is ExtraStackSize plus the maximum number of bytes that need to be passed to the 16-bit real mode code.
If RealModeBufferSize is NULL, then ASSERT(). If ExtraStackSize is NULL, then ASSERT().
| RealModeBufferSize | A pointer to the size of the buffer below 1MB required to use the 16-bit thunk functions. |
| ExtraStackSize | A pointer to the extra size of stack below 1MB that the 16-bit thunk functions require for temporary storage in the transition to and from 16-bit real mode. |
Definition at line 62 of file X86Thunk.c.
Prepares all structures and code for a 16-bit real mode thunk, transfers control to a 16-bit real mode entry point, and returns the results.
Prepares all structures and code for a 16-bit real mode thunk, transfers control to a 16-bit real mode entry point, and returns the results. If the caller only need to perform a single 16-bit real mode thunk, then this service should be used. If the caller intends to make more than one 16-bit real mode thunk, then it is more efficient if AsmPrepareThunk16() is called once and AsmThunk16() can be called for each 16-bit real mode thunk.
This interface is limited to be used in either physical mode or virtual modes with paging enabled where the virtual to physical mappings for ThunkContext.RealModeBuffer is mapped 1:1.
See AsmPrepareThunk16() and AsmThunk16() for the detailed description and ASSERT() conditions.
| ThunkContext | A pointer to the context structure that describes the 16-bit real mode code to call. |
Definition at line 257 of file X86Thunk.c.
Prepares all structures a code required to use AsmThunk16().
Prepares all structures and code required to use AsmThunk16().
This interface is limited to be used in either physical mode or virtual modes with paging enabled where the virtual to physical mappings for ThunkContext.RealModeBuffer is mapped 1:1.
If ThunkContext is NULL, then ASSERT().
| ThunkContext | A pointer to the context structure that describes the 16-bit real mode code to call. |
Definition at line 94 of file X86Thunk.c.
Transfers control to a 16-bit real mode entry point and returns the results.
Transfers control to a 16-bit real mode entry point and returns the results. AsmPrepareThunk16() must be called with ThunkContext before this function is used. This function must be called with interrupts disabled.
The register state from the RealModeState field of ThunkContext is restored just prior to calling the 16-bit real mode entry point. This includes the EFLAGS field of RealModeState, which is used to set the interrupt state when a 16-bit real mode entry point is called. Control is transferred to the 16-bit real mode entry point specified by the CS and Eip fields of RealModeState. The stack is initialized to the SS and ESP fields of RealModeState. Any parameters passed to the 16-bit real mode code must be populated by the caller at SS:ESP prior to calling this function. The 16-bit real mode entry point is invoked with a 16-bit CALL FAR instruction, so when accessing stack contents, the 16-bit real mode code must account for the 16-bit segment and 16-bit offset of the return address that were pushed onto the stack. The 16-bit real mode entry point must exit with a RETF instruction. The register state is captured into RealModeState immediately after the RETF instruction is executed.
If EFLAGS specifies interrupts enabled, or any of the 16-bit real mode code enables interrupts, or any of the 16-bit real mode code makes a SW interrupt, then the caller is responsible for making sure the IDT at address 0 is initialized to handle any HW or SW interrupts that may occur while in 16-bit real mode.
If EFLAGS specifies interrupts enabled, or any of the 16-bit real mode code enables interrupts, then the caller is responsible for making sure the 8259 PIC is in a state compatible with 16-bit real mode. This includes the base vectors, the interrupt masks, and the edge/level trigger mode.
If THUNK_ATTRIBUTE_BIG_REAL_MODE is set in the ThunkAttributes field of ThunkContext, then the user code is invoked in big real mode. Otherwise, the user code is invoked in 16-bit real mode with 64KB segment limits.
If neither THUNK_ATTRIBUTE_DISABLE_A20_MASK_INT_15 nor THUNK_ATTRIBUTE_DISABLE_A20_MASK_KBD_CTRL are set in ThunkAttributes, then it is assumed that the user code did not enable the A20 mask, and no attempt is made to disable the A20 mask.
If THUNK_ATTRIBUTE_DISABLE_A20_MASK_INT_15 is set and THUNK_ATTRIBUTE_DISABLE_A20_MASK_KBD_CTRL is clear in ThunkAttributes, then attempt to use the INT 15 service to disable the A20 mask. If this INT 15 call fails, then attempt to disable the A20 mask by directly accessing the 8042 keyboard controller I/O ports.
If THUNK_ATTRIBUTE_DISABLE_A20_MASK_INT_15 is clear and THUNK_ATTRIBUTE_DISABLE_A20_MASK_KBD_CTRL is set in ThunkAttributes, then attempt to disable the A20 mask by directly accessing the 8042 keyboard controller I/O ports.
If ThunkContext is NULL, then ASSERT(). If AsmPrepareThunk16() was not previously called with ThunkContext, then ASSERT(). If both THUNK_ATTRIBUTE_DISABLE_A20_MASK_INT_15 and THUNK_ATTRIBUTE_DISABLE_A20_MASK_KBD_CTRL are set in ThunkAttributes, then ASSERT().
This interface is limited to be used in either physical mode or virtual modes with paging enabled where the virtual to physical mappings for ThunkContext.RealModeBuffer is mapped 1:1.
| ThunkContext | A pointer to the context structure that describes the 16-bit real mode code to call. |
Definition at line 212 of file X86Thunk.c.
| IA32_REGISTER_SET *EFIAPI InternalAsmThunk16 | ( | IN IA32_REGISTER_SET * | RegisterSet, |
| IN OUT VOID * | Transition | ||
| ) |
Invokes 16-bit code in big real mode and returns the updated register set.
This function transfers control to the 16-bit code specified by CS:EIP using the stack specified by SS:ESP in RegisterSet. The updated registers are saved on the real mode stack and the starting address of the save area is returned.
| RegisterSet | Values of registers before invocation of 16-bit code. |
| Transition | The pointer to the transition code under 1MB. |
1.9.6