SerialIo.h File Reference

Go to the source code of this file.

Data Structures
struct	EFI_SERIAL_IO_MODE
struct	_EFI_SERIAL_IO_PROTOCOL

Macros
#define	EFI_SERIAL_IO_PROTOCOL_GUID
#define	EFI_SERIAL_TERMINAL_DEVICE_TYPE_GUID
#define	SERIAL_IO_PROTOCOL   EFI_SERIAL_IO_PROTOCOL_GUID
#define	EFI_SERIAL_CLEAR_TO_SEND   0x00000010
#define	EFI_SERIAL_DATA_SET_READY   0x00000020
#define	EFI_SERIAL_RING_INDICATE   0x00000040
#define	EFI_SERIAL_CARRIER_DETECT   0x00000080
#define	EFI_SERIAL_INPUT_BUFFER_EMPTY   0x00000100
#define	EFI_SERIAL_OUTPUT_BUFFER_EMPTY   0x00000200
#define	EFI_SERIAL_REQUEST_TO_SEND   0x00000002
#define	EFI_SERIAL_DATA_TERMINAL_READY   0x00000001
#define	EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE   0x00001000
#define	EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE   0x00002000
#define	EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE   0x00004000
#define	EFI_SERIAL_IO_PROTOCOL_REVISION   0x00010000
#define	EFI_SERIAL_IO_PROTOCOL_REVISION1p1   0x00010001
#define	SERIAL_IO_INTERFACE_REVISION   EFI_SERIAL_IO_PROTOCOL_REVISION

Typedefs
typedef struct _EFI_SERIAL_IO_PROTOCOL	EFI_SERIAL_IO_PROTOCOL
typedef EFI_SERIAL_IO_PROTOCOL	SERIAL_IO_INTERFACE
typedef EFI_STATUS(EFIAPI *	EFI_SERIAL_RESET) (IN EFI_SERIAL_IO_PROTOCOL *This)
typedef EFI_STATUS(EFIAPI *	EFI_SERIAL_SET_ATTRIBUTES) (IN EFI_SERIAL_IO_PROTOCOL *This, IN UINT64 BaudRate, IN UINT32 ReceiveFifoDepth, IN UINT32 Timeout, IN EFI_PARITY_TYPE Parity, IN UINT8 DataBits, IN EFI_STOP_BITS_TYPE StopBits)
typedef EFI_STATUS(EFIAPI *	EFI_SERIAL_SET_CONTROL_BITS) (IN EFI_SERIAL_IO_PROTOCOL *This, IN UINT32 Control)
typedef EFI_STATUS(EFIAPI *	EFI_SERIAL_GET_CONTROL_BITS) (IN EFI_SERIAL_IO_PROTOCOL *This, OUT UINT32 *Control)
typedef EFI_STATUS(EFIAPI *	EFI_SERIAL_WRITE) (IN EFI_SERIAL_IO_PROTOCOL *This, IN OUT UINTN *BufferSize, IN VOID *Buffer)
typedef EFI_STATUS(EFIAPI *	EFI_SERIAL_READ) (IN EFI_SERIAL_IO_PROTOCOL *This, IN OUT UINTN *BufferSize, OUT VOID *Buffer)

Enumerations
enum	EFI_PARITY_TYPE {   DefaultParity , NoParity , EvenParity , OddParity ,   MarkParity , SpaceParity }
enum	EFI_STOP_BITS_TYPE { DefaultStopBits , OneStopBit , OneFiveStopBits , TwoStopBits }

Variables
EFI_GUID	gEfiSerialIoProtocolGuid
EFI_GUID	gEfiSerialTerminalDeviceTypeGuid

Detailed Description

Serial IO protocol as defined in the UEFI 2.0 specification.

Abstraction of a basic serial device. Targeted at 16550 UART, but could be much more generic.

Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent

Definition in file SerialIo.h.

Macro Definition Documentation

EFI_SERIAL_CARRIER_DETECT

#define EFI_SERIAL_CARRIER_DETECT   0x00000080

Definition at line 69 of file SerialIo.h.

EFI_SERIAL_CLEAR_TO_SEND

#define EFI_SERIAL_CLEAR_TO_SEND   0x00000010

Definition at line 66 of file SerialIo.h.

EFI_SERIAL_DATA_SET_READY

#define EFI_SERIAL_DATA_SET_READY   0x00000020

Definition at line 67 of file SerialIo.h.

EFI_SERIAL_DATA_TERMINAL_READY

#define EFI_SERIAL_DATA_TERMINAL_READY   0x00000001

Definition at line 77 of file SerialIo.h.

EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE

#define EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE   0x00004000

Definition at line 84 of file SerialIo.h.

EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE

#define EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE   0x00001000

Definition at line 82 of file SerialIo.h.

EFI_SERIAL_INPUT_BUFFER_EMPTY

#define EFI_SERIAL_INPUT_BUFFER_EMPTY   0x00000100

Definition at line 70 of file SerialIo.h.

EFI_SERIAL_IO_PROTOCOL_GUID

#define EFI_SERIAL_IO_PROTOCOL_GUID

Value:

  { \
    0xBB25CF6F, 0xF1D4, 0x11D2, {0x9A, 0x0C, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0xFD } \
  }

Definition at line 15 of file SerialIo.h.

EFI_SERIAL_IO_PROTOCOL_REVISION

#define EFI_SERIAL_IO_PROTOCOL_REVISION   0x00010000

Definition at line 270 of file SerialIo.h.

EFI_SERIAL_IO_PROTOCOL_REVISION1p1

#define EFI_SERIAL_IO_PROTOCOL_REVISION1p1   0x00010001

Definition at line 271 of file SerialIo.h.

EFI_SERIAL_OUTPUT_BUFFER_EMPTY

#define EFI_SERIAL_OUTPUT_BUFFER_EMPTY   0x00000200

Definition at line 71 of file SerialIo.h.

EFI_SERIAL_REQUEST_TO_SEND

#define EFI_SERIAL_REQUEST_TO_SEND   0x00000002

Definition at line 76 of file SerialIo.h.

EFI_SERIAL_RING_INDICATE

#define EFI_SERIAL_RING_INDICATE   0x00000040

Definition at line 68 of file SerialIo.h.

EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE

#define EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE   0x00002000

Definition at line 83 of file SerialIo.h.

EFI_SERIAL_TERMINAL_DEVICE_TYPE_GUID

#define EFI_SERIAL_TERMINAL_DEVICE_TYPE_GUID

Value:

  { \
    0X6AD9A60F, 0X5815, 0X4C7C, { 0X8A, 0X10, 0X50, 0X53, 0XD2, 0XBF, 0X7A, 0X1B } \
  }

Definition at line 20 of file SerialIo.h.

SERIAL_IO_INTERFACE_REVISION

#define SERIAL_IO_INTERFACE_REVISION   EFI_SERIAL_IO_PROTOCOL_REVISION

Definition at line 272 of file SerialIo.h.

SERIAL_IO_PROTOCOL

#define SERIAL_IO_PROTOCOL   EFI_SERIAL_IO_PROTOCOL_GUID

Protocol GUID defined in EFI1.1.

Definition at line 28 of file SerialIo.h.

Typedef Documentation

EFI_SERIAL_GET_CONTROL_BITS

typedef EFI_STATUS(EFIAPI * EFI_SERIAL_GET_CONTROL_BITS) (IN EFI_SERIAL_IO_PROTOCOL *This, OUT UINT32 *Control)

Retrieves the status of thecontrol bits on a serial device

Parameters

This	Protocol instance pointer.
Control	A pointer to return the current Control signals from the serial device.

Return values

EFI_SUCCESS	The control bits were read from the serial device.
EFI_DEVICE_ERROR	The serial device is not functioning correctly.

Definition at line 173 of file SerialIo.h.

EFI_SERIAL_IO_PROTOCOL

typedef struct _EFI_SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL

Definition at line 30 of file SerialIo.h.

EFI_SERIAL_READ

typedef EFI_STATUS(EFIAPI * EFI_SERIAL_READ) (IN EFI_SERIAL_IO_PROTOCOL *This, IN OUT UINTN *BufferSize, OUT VOID *Buffer)

Writes data to a serial device.

Parameters

This	Protocol instance pointer.
BufferSize	On input, the size of the Buffer. On output, the amount of data returned in Buffer.
Buffer	The buffer to return the data into.

Return values

EFI_SUCCESS	The data was read.
EFI_DEVICE_ERROR	The device reported an error.
EFI_TIMEOUT	The data write was stopped due to a timeout.

Definition at line 214 of file SerialIo.h.

EFI_SERIAL_RESET

typedef EFI_STATUS(EFIAPI * EFI_SERIAL_RESET) (IN EFI_SERIAL_IO_PROTOCOL *This)

Reset the serial device.

Parameters

This	Protocol instance pointer.

Return values

EFI_SUCCESS	The device was reset.
EFI_DEVICE_ERROR	The serial device could not be reset.

Definition at line 100 of file SerialIo.h.

EFI_SERIAL_SET_ATTRIBUTES

typedef EFI_STATUS(EFIAPI * EFI_SERIAL_SET_ATTRIBUTES) (IN EFI_SERIAL_IO_PROTOCOL *This, IN UINT64 BaudRate, IN UINT32 ReceiveFifoDepth, IN UINT32 Timeout, IN EFI_PARITY_TYPE Parity, IN UINT8 DataBits, IN EFI_STOP_BITS_TYPE StopBits)

Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, data bits, and stop bits on a serial device.

Parameters

This	Protocol instance pointer.
BaudRate	The requested baud rate. A BaudRate value of 0 will use the device's default interface speed.
ReveiveFifoDepth	The requested depth of the FIFO on the receive side of the serial interface. A ReceiveFifoDepth value of 0 will use the device's default FIFO depth.
Timeout	The requested time out for a single character in microseconds. This timeout applies to both the transmit and receive side of the interface. A Timeout value of 0 will use the device's default time out value.
Parity	The type of parity to use on this serial device. A Parity value of DefaultParity will use the device's default parity value.
DataBits	The number of data bits to use on the serial device. A DataBits vaule of 0 will use the device's default data bit setting.
StopBits	The number of stop bits to use on this serial device. A StopBits value of DefaultStopBits will use the device's default number of stop bits.

Return values

EFI_SUCCESS	The device was reset.
EFI_INVALID_PARAMETER	One or more attributes has an unsupported value.
EFI_DEVICE_ERROR	The serial device is not functioning correctly.

Definition at line 133 of file SerialIo.h.

EFI_SERIAL_SET_CONTROL_BITS

typedef EFI_STATUS(EFIAPI * EFI_SERIAL_SET_CONTROL_BITS) (IN EFI_SERIAL_IO_PROTOCOL *This, IN UINT32 Control)

Set the control bits on a serial device

Parameters

This	Protocol instance pointer.
Control	Set the bits of Control that are settable.

Return values

EFI_SUCCESS	The new control bits were set on the serial device.
EFI_UNSUPPORTED	The serial device does not support this operation.
EFI_DEVICE_ERROR	The serial device is not functioning correctly.

Definition at line 156 of file SerialIo.h.

EFI_SERIAL_WRITE

typedef EFI_STATUS(EFIAPI * EFI_SERIAL_WRITE) (IN EFI_SERIAL_IO_PROTOCOL *This, IN OUT UINTN *BufferSize, IN VOID *Buffer)

Writes data to a serial device.

Parameters

This	Protocol instance pointer.
BufferSize	On input, the size of the Buffer. On output, the amount of data actually written.
Buffer	The buffer of data to write

Return values

EFI_SUCCESS	The data was written.
EFI_DEVICE_ERROR	The device reported an error.
EFI_TIMEOUT	The data write was stopped due to a timeout.

Definition at line 193 of file SerialIo.h.

SERIAL_IO_INTERFACE

typedef EFI_SERIAL_IO_PROTOCOL SERIAL_IO_INTERFACE

Backward-compatible with EFI1.1.

Definition at line 35 of file SerialIo.h.

Enumeration Type Documentation

EFI_PARITY_TYPE

enum EFI_PARITY_TYPE

Parity type that is computed or checked as each character is transmitted or received. If the device does not support parity, the value is the default parity value.

Definition at line 41 of file SerialIo.h.

EFI_STOP_BITS_TYPE

enum EFI_STOP_BITS_TYPE

Stop bits type

Definition at line 53 of file SerialIo.h.