Definition at line 1240 of file UefiPxe.h.
◆ DuplexMode
| PXE_UINT8 s_pxe_cpb_initialize::DuplexMode |
The following configuration parameters are optional and must be zero to use the default values.
Definition at line 1280 of file UefiPxe.h.
◆ LinkSpeed
| PXE_UINT32 s_pxe_cpb_initialize::LinkSpeed |
Desired link speed in Mbit/sec. Common ethernet values are 10, 100 and 1000. Setting a value of zero will auto-detect and/or use the default link speed (operation depends on UNDI/NIC functionality).
Definition at line 1259 of file UefiPxe.h.
◆ LoopBackMode
| PXE_UINT8 s_pxe_cpb_initialize::LoopBackMode |
◆ MemoryAddr
Address of first (lowest) byte of the memory buffer. This buffer must be in contiguous physical memory and cannot be swapped out. The UNDI will be using this for transmit and receive buffering.
Definition at line 1246 of file UefiPxe.h.
◆ MemoryLength
| PXE_UINT32 s_pxe_cpb_initialize::MemoryLength |
MemoryLength must be greater than or equal to MemoryRequired returned by the Get Init Info command.
Definition at line 1252 of file UefiPxe.h.
◆ RxBufCnt
| PXE_UINT16 s_pxe_cpb_initialize::RxBufCnt |
◆ RxBufSize
| PXE_UINT16 s_pxe_cpb_initialize::RxBufSize |
◆ TxBufCnt
| PXE_UINT16 s_pxe_cpb_initialize::TxBufCnt |
Suggested number and size of receive and transmit buffers to allocate. If MemoryAddr and MemoryLength are non-zero, this allocation comes out of the supplied memory buffer. If MemoryAddr and MemoryLength are zero, this allocation comes out of memory on the NIC.
If these fields are set to zero, the UNDI will allocate buffer counts and sizes as it sees fit.
Definition at line 1271 of file UefiPxe.h.
◆ TxBufSize
| PXE_UINT16 s_pxe_cpb_initialize::TxBufSize |
The documentation for this struct was generated from the following file:
1.9.6